SC4 Public > SC4 Open > SC4 and Working Groups > WG3 > N-DOCS > 1000-1499

ISO TC184/SC4 SC4 Logo
TC184/SC4 Industrial Data SC4 Online Logo

WG3 N-DOCS


NOTE: You are using a browser which may require you to refresh your display occasionally. See the Help section for details on known issues on this subject.

Help/Instructions    Type Legend

Turn Off Folder Description

Search THIS Repository  

Return to Top Level N-Docs

Data Current As Of: 2010-09-02 13:23:01 EST

Total Number Of Folders: 469   Total Number Of Folder Entries: 424

  Sort ALL Folders  
  Sort Top Level Folders  
    WG3 N-Docs 1490 - 1499 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1499 -
  2. WG3 N1498 - Project leader approval checklist for ISO/Confirm-TS 10303-1230, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2004-12-07; Frechette, Simon
  3. WG3 N1497 - Internal review checklist for ISO/Confirm-TS 10303-1230, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2004-12-06; Nettles, Darla
  4. WG3 N1496 - ISO/CD 10303-235 source document, STEP Part 235, Application protocol: Engineering properties for product design and validation, 2005-09-11; Moreno, Anna
    This document supersedes ISO TC184/SC4/WG3 N1329.
  5. WG3 N1495 - WG3 T1 Meeting Minutes, Bath, UK, 2004-07-05/09, 2004-07-22; Goult, Ray
  6. WG3 N1494 - Internal review checklist for ISO/CD TS 15926-4, Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data, 200407-22; Leal, David
  7. WG3 N1493 - Project leader approval checklist for ISO/CD TS 15926-4, Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data, 2004-07-22; van Exel, Paul and Sandsmark, Nils
  8. WG3 N1492 - WG3 Meeting Minutes, Bath, UK, 2004-07-05/08, 2004-07-18; Radack, Gerald
  9. WG3 N1491-
  10. WG3 N1490 - Project leader approval checklist for ISO/Confirm-TS 10303-1231, STEP Part 1231, Application module: Product data management, 2004-12-21; Frechette, Simon
    WG3 N-Docs 1480 - 1489 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1489 - Internal review checklist for ISO/Confirm-TS 10303-1231, STEP Part 1231, Application module: Product data management, 2004-12-06; Nettles, Darla
  2. WG3 N1488 - EXPRESS MIM long form for ISO/Confirm-TS 10303-1231, STEP Part 1231, Application module: Product data management, 2004-12-21; Hendrix, Thomas E
  3. WG3 N1487 - EXPRESS MIM short form for ISO/Confirm-TS 10303-1231, STEP Part 1231, Application module: Product data management, 2004-09-29; Barnard Feeney, Allison
  4. WG3 N1486 - EXPRESS ARM long form for ISO/Confirm-TS 10303-1231, STEP Part 1231, Application module: Product data management, 2004-12-21; Hendrix, Thomas E
  5. WG3 N1485 - EXPRESS ARM short form for ISO/Confirm-TS 10303-1231, STEP Part 1231, Application module: Product data management, 2004-07-12; Bodington, Rob
  6. WG3 N1484 - ISO/Confirm-TS 10303-1231 source document, STEP Part 1231, Application module: Product data management, 2005-02-11; Frechette, Simon
  7. WG3 N1483 -
  8. WG3 N1482 -
  9. WG3 N1481 - EXPRESS AIM long form for ISO/IS 10303-227 ed2, STEP Part 227 ed2, Application protocol: Plant spatial configuration 2005-02-21; Palmer, Mark
  10. WG3 N1480 - EXPRESS AIM short form for ISO/IS 10303-227 ed2, STEP Part 227 ed2, Application protocol: Plant spatial configuration 2005-02-21; Palmer, Mark
    WG3 N-Docs 1470 - 1479 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1479 - Convener approval checklist for ISO/IS 10303-227 ed2, STEP Part 227, ed2, Application protocol: Plant spatial configuration, 2005-02-23; Radack, Gerald
  2. WG3 N1478 - Project leader approval checklist for ISO/IS 10303-227 ed2, STEP Part 227, ed2, Application protocol: Plant spatial configuration, 2004-10-29; Mays, Jim
  3. WG3 N1477 - Internal review checklist for ISO/IS 10303-227 ed2, STEP Part 227, ed2, Application protocol: Plant spatial configuration, 2004-06-18; Gischner, Burt
  4. WG3 N1476 - ISO/IS 10303-227 ed2 source document, STEP Part 227, ed2, Application protocol: Plant spatial configuration, 2005-02-21; Palmer, Mark
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG3 N1144.
  5. WG3 N1475 - EXPRESS MIM long form for ISO/Confirm-TS 10303-1230, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2004-12-21; Nettles, Darla
  6. WG3 N1474 - EXPRESS MIM short form for ISO/Confirm-TS 10303-1230, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2004-12-10; Hendrix, Thomas E
  7. WG3 N1473 - EXPRESS ARM long form for ISO/Confirm-TS 10303-1230, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2004-12-21; Nettles, Darla
  8. WG3 N1472 - EXPRESS ARM short form for ISO/Confirm-TS 10303-1230, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2004-11-30; Hendrix, Thomas E
  9. WG3 N1471- ISO/Confirm-TS 10303-1230 source document, STEP Part 1230, Application module: Configuration controlled 3d parts and assemblies, 2005-02-11; Frechette, Simon
  10. WG3 N1470 - Minutes, ISO TC184/SC4/WG3/T25, Ft Lauderdale, FL, USA, 2004-03-01, 2004-04-06; Sandsmark, Nils and van Exel, Paul
    WG3 N-Docs 1460 - 1469 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1469 - EXPRESS AIM long form for ISO/DIS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2005-01-18; Slovensky, Len
    This document supersedes ISO TC184/SC4/WG3 N1371.
  2. WG3 N1468 - EXPRESS AIM short form for ISO/DIS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2005-01-18; Slovensky, Len
    This document supersedes ISO TC184/SC4/WG3 N1370.
  3. WG3 N1467 -
  4. WG3 N1466 -
  5. WG3 N1465 - Issue resolution log for ISO/DIS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-11-12; Slovensky, Len
  6. WG3 N1464 - Convener approval checklist for ISO/IS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2005-02-16; Radack, Gerald
  7. WG3 N1463 - Project leader approval checklist for ISO/IS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2005-01-18; Slovensky, Len
  8. WG3 N1462 - Internal review checklist for ISO/IS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2005-01-18; SAKAMOTO, Chiaki
  9. WG3 N1461 - ISO/IS 10303-240 source document, STEP Part 240, Application protocol: Process plans for machined products, 2005-01-21; SAKAMOTO, Chiaki
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1369.
  10. WG3 N1460 - ISO/pre-DIS-WD 10303-238 source document, STEP Part 238, Application protocol: Application interpreted model for computerized numerical controllers, 2004-06-09; Crawford, Alan
    WG3 N-Docs 1450 - 1459 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N1459 -
  2. WG3 N1458 -
  3. WG3 N1457 -
  4. WG3 N1456 - ISO/IS 15926-1 source document, Process Plants Part 1, Overview and fundamental principles, 2004-05-14; Sandsmark, Nils
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1291.
  5. WG3 N1455 - Convener approval checklist for ISO/CD-TS 15926-3, Process Plants Part 3, Ontology for geometry and topology, 2005-06-02; Radack, Gerald
  6. WG3 N1454 - Project leader approval checklist for ISO/CD-TS 15926-3, Process Plants Part 3, Ontology for geometry and topology, 2005-01-19; Sandsmark, Nils
  7. WG3 N1453 - Internal review checkllist for ISO/CD-TS 15926-3, Process Plants Part 3, Ontology for geometry and topology, 2004-12-03; Goult, Ray
  8. WG3 N1452 - ISO/CD-TS 15926-3 source document, Process Plants Part 3, Ontology for geometry and topology 2005-01-19; Sandsmark, Nils
    This document supersedes ISO TC184/SC4/WG3 N1436.
    This document is superseded by ISO TC184/SC4/WG3 N2122.
  9. WG3 N1451 - Validation report for ISO/DIS 10303-239, STEP Part 239, Application protocol: Product life cycle support, 2004-03-28; Dunford, John
  10. WG3 N1450 - Technical changes between ISO 10303-203 (Amendment 1:2000) and ISO/TS 10303-203 (to be published), 2004-03-30; Anderson, Bill
    WG3 N-Docs 1440 - 1449 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N1449 - Minutes of ISO TC184/SC4/WG3, Ft Lauderdale, FL,USA, 2004-03-01/04, 2004-03-22; Radack, Gerald
  2. WG3 N1448 -
  3. WG3 N1447 -
  4. WG3 N1446 -
  5. WG3 N1445 - ISO/CD TS 15926-4 source document, Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data, 2004-09-29; van Exel, Paul and Sandsmark, Nils
  6. WG3 N1444 - Test cases for ISO/DIS 10303-236, STEP Part 236, Application protocol: Furniture product data and project data, 2005-04-04; Gonçalves, Ricardo
  7. WG3 N1443 - ISO/DIS 10303-236 source documents and related checklists and test documents, STEP Part 236, Application protocol: Furniture product data and project data, 2005-04-04; Gonçalves, Ricardo
    Source documents in this folder are © ISO. SC4ONLINE user identifier and password are needed to access these documents.
  8. WG3 N1442 - DIS Validation Report for ISO/DIS 10303-236, STEP Part 236, Application protocol: Furniture product data and project data, 2005-03-23, Olavo, Ricardo
  9. WG3 N1441 - Convener approval checklist for ISO/DIS 10303-236, STEP Part 236, Application protocol: Furniture product data and project data, 2005-04-01; Radack, Gerald
  10. WG3 N1440 - Project leader approval checklist for ISO/DIS 10303-236, STEP Part 236, Application protocol: Furniture product data and project data, 2005-03-23; Gonçalves, Ricardo
    WG3 N-Docs 1430 - 1439 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1439 - Internal review checklist for ISO/DIS 10303-236, STEP Part 236, Application protocol: Furniture product data and project data, 2005-03-23; Nunyez, Maria Jose
  2. WG3 N1438 - ISO/DIS 10303-236 source document modules package, STEP Part 236, Application protocol: Furniture product data and project data, 2006-09-21; Gonçalves, Ricardo
    This source document modules package contains © ISO documents. SC4ONLINE user identifier and password are needed to access this package.
    This document has been superceded by WG3N2197
  3. WG3 N1437 - Agreement on the Proposal for the Publication of the ISO 15926 RDL 2004-04-06; Sandsmark, Nils and van Exel, Paul
  4. WG3 N1436 -
  5. WG3 N1435 - Convener approval checklist for ISO/CD TS 15926-7, Process Plants Part 7, Implementation methods for the integration of distributed systems, 2005-05-12; Radack, Gerald
  6. WG3 N1434 - Project leader approval checklist for ISO/CD TS 15926-7, Process Plants Part 7, Implementation methods for the integration of distributed systems, 2005-04-20; Pruijn, Peter Paul
  7. WG3 N1433 - Internal review checklist for ISO/CD TS 15926-7, Process Plants Part 7, Implementation methods for the integration of distributed systems, 2005-04-20; Teijgeler, Hans
  8. WG3 N1432 -
  9. WG3 N1431 - Minutes of T20 and T21 Meetings, Poitiers, France, 2003-10-26/31 2004-01-27; Radack, Gerald
  10. WG3 N1430 - Ballot preparation package for ISO/DIS 10303-221, STEP Part 221, Application protocol: Functional data and their spchematic representation for process plant, 2005-04-07; Van Renssen, Andries
    WG3 N-Docs 1420 - 1429 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N1429 - Validation report for ISO/DIS 10303-221, STEP Part 221, Application protocol: Functional data and their schematic representation for process plant, 2004-11-04; Leal, David
  2. WG3 N1428 - Convener approval checklist for ISO/DIS 10303-221, STEP Part 221, Application protocol: Functional data and their schematic representation for process plant, 2005-04-03; Radack Gerald
  3. WG3 N1427 - Project leader approval checklist for ISO/DIS 10303-221, STEP Part 221, Application protocol: Functional data and their schematic representation for process plant, 2004-09-30; van Exel, Paul
  4. WG3 N1426 - Internal review checklist for ISO/DIS 10303-221, STEP Part 221, Application protocol: Functional data and their schematic representation for process plant, 2004-09-30; Leal, David
  5. WG3 N1425 - ISO/DIS 10303-221 source documents, STEP Part 221, Application protocol: Functional data and their schematic representation for process plant, 2005-01-14; Van Renssen, Andries
    This document is © ISO. SC4ONLINE user identifier/password are needed to access this document.
  6. WG3 N1424 - Issue log for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-12-14; Lazo, Peter
  7. WG3 N1423 - ISO 15926-2:2003 lifecycle_integration_schema EXPRESS-G Wall Chart, 2003-12-16; West, Matthew
  8. WG3 N1422 -
  9. WG3 N1421-
  10. WG3 N1420 -
    WG3 N-Docs 1410 - 1419 (0 entries 4 subfolders)
This folder contains:
  1. WG3 N1419 -
  2. WG3 N1418 -
  3. WG3 N1417 -
  4. WG3 N1416 -
  5. WG3 N1415 -
  6. WG3 N1414 - Minutes of ISO TC184/SC4/WG3 Team 1 (with WG12) Poitiers, France 2003-10-27 to 2003-10-31, 2003-12-01; Goult, Ray
  7. WG3 N1413 - Ballot package for ISO/DIS 10303-239 , STEP Part 239, Application protocol: Product life cycle support, 2004-03-26; Dunford, John
    This ballot package contains an © ISO document.
  8. WG3 N1412 -
  9. WG3 N1411 - Minutes of ISO TC184/SC4/WG3 Poitiers, France 2003-10-27 to 2003-10-31, 2003-11-17; Radack, Gerald
  10. WG3 N1410 - EXPRESS ARM long form for ISO CD TS 10303-1213, STEP Part 1213, Application module: Reference data library, 2003-12-29; Bodington, Rob
    WG3 N-Docs 1400 - 1409 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1409 - EXPRESS ARM long form for ISO CD TS 10303-1151, STEP Part 1151, Application module: Functional data, 2003-12-29; Bodington, Rob
  2. WG3 N1408 - EXPRESS ARM long form for ISO CD TS 10303-421, STEP Part 421, Application module: Functional data and schematic representation, 2003-12-29; Bodington, Rob
  3. WG3 N1407 - ISO/CD TS 10303-421/1151/1213 source documents, STEP AM Functional data and schematic representation (AP221) modules package, 2004-01-29; Leal, David
  4. WG3 N1406 - ISO/TS 10303-439/1287/1292/1293/1304/1305/1307 source documents, STEP AP239 Modules Package, 2004-03-18; Dunford, John
    These documents are © ISO.
  5. WG3 N1405 - Convener approval checklist for ISO/TS 10303-439/1287/1292/1293/1304/1305/1307, STEP AP239 Modules Package, 2004-03-16; Radack, Gerald
  6. WG3 N1404 - Project leader approval checklist for ISO/TS 10303-439/1287/1292/1293/1304/1305/1307, STEP AP239 Modules Package, 2004-02-11; Dunford, John
  7. WG3 N1403 - Internal review checklist for ISO/TS 10303-439/1287/1292/1293/1304/1305/1307, STEP AP239 Modules Package, 2004-02-11; Nettles, Darla
  8. WG3 N1402 - EXPRESS MIM Long Form for ISO/TS 10303-439, STEP Part 439, Application module: AP239 product life cycle support, 2004-03-18; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1240.
  9. WG3 N1401 - EXPRESS MIM for ISO/TS 10303-439, STEP Part 439, Application module: AP239 product life cycle support, 2003-10-09; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1238.
  10. WG3 N1400 - EXPRESS ARM Long Form for ISO/TS 10303-439, STEP Part 439, Application module: AP239 product life cycle support, 2004-03-18; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1239.
    WG3 N-Docs 1390 - 1399 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1399 - EXPRESS ARM for ISO/TS 10303-439, STEP Part 439, Application module: AP239 product life cycle support, 2003-10-09; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1237.
  2. WG3 N1398 - ISO/TS 10303-439 source document, STEP Part 439, Application module: AP239 product life cycle support, 2004-03-18; Dunford, John
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1236.
  3. WG3 N1397 - EXPRESS MIM for ISO/TS 10303-1304, STEP Part 1304, Application module: AP239 product status recording, 2003-10-30; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1264.
  4. WG3 N1396 - EXPRESS ARM for ISO/TS 10303-1304, STEP Part 1304, Application module: AP239 product status recording, 2003-10-30; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1263.
  5. WG3 N1395 - ISO/TS 10303-1304 source document, STEP Part 1304, Application module: AP239 product status recording, 2004-03-18; Dunford, John
    This document is © ISO This document supersedes ISO TC184/SC4/WG3 N1262.
  6. WG3 N1394 - EXPRESS MIM for ISO/TS 10303-1287, STEP Part 1287, Application module: AP239 activity recording, 2003-12-12; Barker, Sean
    This document supersedes ISO TC184/SC4/WG3 N1289.
  7. WG3 N1393 - EXPRESS ARM for ISO/TS 10303-1287, STEP Part 1287, Application module: AP239 activity recording, 2003-12-31; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1279.
  8. WG3 N1392 - ISO/TS 10303-1287 source document, STEP Part 1287, Application module: AP239 activity recording, 2004-03-18; Dunford, John
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1261.
  9. WG3 N1391 - EXPRESS MIM for ISO/TS 10303-1292, STEP Part 1292, Application module: AP239 product definition information, 2003-12-03; Bodington,Rob
    This document supersedes ISO TC184/SC4/WG3 N1181.
  10. WG3 N1390 - EXPRESS ARM for ISO/TS 10303-1292, STEP Part 1292, Application module: AP239 product definition information, 2003-12-03; Bodington,Rob
    This document supersedes ISO TC184/SC4/WG3 N1180.
    WG3 N-Docs 1380 - 1389 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1389 - ISO/TS 10303-1292 source document, STEP Part 1292, Application module: AP239 product definition information, 2004-03-18; Dunford, John
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1179.
  2. WG3 N1388 - EXPRESS MIM for ISO/TS 10303-1307, STEP Part 1307, Application module: AP239 work definition, 2003-11-14; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1282.
  3. WG3 N1387 - EXPRESS ARM for ISO/TS 10303-1307, STEP Part 1307, Application module: AP239 work definition, 2003-11-13; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1281.
  4. WG3 N1386 - ISO/TS 10303-1307 source document, STEP Part 1307, Application module: AP239 work definition, 2004-03-18; Dunford, John
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1280.
  5. WG3 N1385 - EXPRESS MIM for ISO/TS 10303-1306, STEP Part 1306, Application module: AP239 task specification resourced, 2004-02-28; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1273.
  6. WG3 N1384 - EXPRESS ARM for ISO/TS 10303-1306, STEP Part 1306, Application module: AP239 task specification resourced, 2004-02-28; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1272.
  7. WG3 N1383 - ISO/TS 10303-1306 source document, STEP Part 1306, Application module: AP239 task specification resourced, 2004-03-18; Dunford, John
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1271.
  8. WG3 N1382 - EXPRESS MIM for ISO/TS 10303-1293, STEP Part 1293, Application module: AP239 part definition information, 2003-12-13; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1184.
  9. WG3 N1381 - EXPRESS ARM for ISO/TS 10303-1293, STEP Part 1293, Application module: AP239 part definition information, 2003-12-13; Bodington, Rob
    This document supersedes ISO TC184/SC4/WG3 N1183.
  10. WG3 N1380 - ISO/TS 10303-1293 source document, STEP Part 1293, Application module: AP239 part definition information, 2004-03-18; Dunford, John
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1182.
    WG3 N-Docs 1370 - 1379 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1379 - Abstract for ISO/FDIS 15926-001, Integration of life cycle data for process plants including oil & gas facilities, Part 1: Overview and fundamental principles, 2003-09-23; Sandsmark, Nils
  2. WG3 N1378 - Issue Log for ISO/FDIS 15926-001, Integration of life cycle data for process plants including oil & gas facilities, Part 1: Overview and fundamental principles, 2003-02-03; Sandsmark, Nils
  3. WG3 N1377 - Test case definition for ISO/DIS 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-09-23; Slovenksy, Len and Sakamoto, Chiaki
  4. WG3 N1376 - Convener approval checklist for ISO/CD 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-10-14; Radack, Gerald
  5. WG3 N1375 - Project leader approval checklist for ISO/CD 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-09-23; Slovensky, Len
  6. WG3 N1374 - Internal review checklist for ISO/CD 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-09-21; Sakamoto, Chiaki
  7. WG3 N1373 - Issue log for ISO/CD 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-10-14; Slovensky, Len
  8. WG3 N1372 - Validation report for ISO/DIS 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-09-24; Slovenksy, Len and Sakamoto, Chiaki
  9. WG3 N1371 - EXPRESS AIM long form for ISO/DIS 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-09-23; Sakamoto, Chiaki
  10. WG3 N1370 - EXPRESS AIM short form for ISO/DIS 10303-0240, STEP Part 240, Application protocol: Process plans for machined products, 2003-09-23; Sakamoto, Chiaki
    WG3 N-Docs 1360 - 1369 (0 entries 9 subfolders)
This folder contains:
  1. WG3 N1369 - ISO/DIS 10303-0240 source document, STEP Part 240, Application protocol: Process plans for machined products, 2003-10-14; Sakamoto, Chiaki
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG 3 N1167.
  2. WG3 N1368 -
  3. WG3 N1367 - ISO/CD 10303-0203 ed2 source document (zipped), STEP Part 203, Application protocol: Configuration controlled 3D design of mechanical parts and assemblies, 2003-08-21; Anderson, Bill
  4. WG3 N1366 - Validation report for ISO/CD 10303-0203 ed2, STEP Part 203, Application Protocol 203:Configuration controlled 3D design of mechanical parts and assemblies, 2003-08-20; Anderson, Bill
  5. WG3 N1365 - Test Case Definition Document for ISO/CD 10303-0203 ed2, STEP Part 203, Application Protocol 203:Configuration controlled 3D design of mechanical parts and assemblies, 2003-08-15; Anderson, Bill
  6. WG3 N1364 - Convener approval checklist for ISO/DIS 10303-239, STEP Part 239, Application protocol: Product life cycle support, 2004-03-16; Radack, Gerald
  7. WG3 N1363 - Project leader approval checklist for ISO/DIS 10303-239, STEP Part 239, Application protocol: Product life cycle support, 2004-02-12; Dunford, John
  8. WG3 N1362 - Internal review checklist for ISO/DIS 10303-239, STEP Part 239, Application protocol: Product life cycle support, 2003-10-29; Nettles, Darla
  9. WG3 N1361 - ISO/DIS 10303-239 source document, STEP Part 239, Application protocol: Product life cycle support, 2004-02-24; Dunford, John
    This document is © ISO.
  10. WG3 N1360 - EXPRESS ARM for ISO/CD PAS 20542, Reference model for systems engineering, 2004-05-03; URen, Jim
    WG3 N-Docs 1350 - 1359 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1359 - Test case identification report for ISO/CD PAS 20542, Reference model for systems engineering, 2001-11-26; Mansel, Wolfgang
  2. WG3 N1358 - Convener approval checklist for ISO/CD PAS 20542, Reference model for systems engineering, 2004-06-10; Radack, Gerald
  3. WG3 N1357 - Project leader approval checklist for ISO/CD PAS 20542, Reference model for systems engineering, 2004-03-31; URen, Jim
  4. WG3 N1356 - Internal review checklist for ISO/CD PAS 20542, Reference model for systems engineering, 2003-12-05; Johnson, Julian
  5. WG3 N1355 - ISO/CD PAS 20542 source document, Reference model for systems engineering, 2004-05-03; URen, Jim
    This document supersedes ISO TC184/SC4/WG3 N1234.
  6. WG3 N1354 - PLCS ballot package 4 - Product Life Cycle Support source documents, 2003-08-08; Dunford, John
  7. WG3 N1353 - ISO/WD 10303-237 source document, STEP Part 237, Application protocol: Fluid dynamics, 2003-07-24; Cosner, Ray
  8. WG3 N1352 - Convener approval checklists for PLCS ballot cycle 3, Work management package (AM 1258/1306/1307/1286/1285) and Product conformance class package (AM 1292/1357), 2003-07-10; Hunten, Keith
  9. WG3 N1351 - PLCS ballot package 3, 2003-07-25; Dunford, John
  10. WG3 N1350 - ISO/IS 10303-218 source document, STEP Part 218, Application protocol: Ship structures, 2004-05-19; Grau, Matthias
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1080.
    WG3 N-Docs 1340 - 1349 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1349 - ARM EXPRESS for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-06-20; Slovenksy, Len
  2. WG3 N1348 - Convener approval checklist for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2004-05-19; Radack, Gerald
  3. WG3 N1347 - Project leader approval checklist for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-06-15; Grau, Matthias
  4. WG3 N1346 - Internal review checklist for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-05-19; Gischner, Burt
  5. WG3 N1345 - Validation Report for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-05-20; Gischner, Burt
    This document supersedes ISO TC184/SC4/WG3 N1086.
  6. WG3 N1344 - Issues Log for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-01-30; Grau, Matthias
  7. WG3 N1343 - AIM Short Form for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-06-17; Slovenksy, Len
  8. WG3 N1342 - AIM Long Form for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-06-17; Slovenksy, Len
  9. WG3 N1341 - Test Case Definition Rev D for ISO/IS 10303-218, STEP Part 218, Application protocol: Ship structures, 2003-01-31; Downie, Blair
  10. WG3 N1340 - Issue resolution log for ISO/CD TS 10303-439/1287/1292/1293/1304/1307/1308, STEP AP239 Modules Package, 2003-11-14; Dunford, John
    WG3 N-Docs 1330 - 1339 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1339 - EXPRESS MIM short form for ISO/CD-TS 10303-436, STEP Part 436, Application module: AP236 furniture catalog and interior design, 2004-03-02; Panetto, Hervé
  2. WG3 N1338 - EXPRESS ARM short form for ISO/CD-TS 10303-436, STEP Part 436, Application module: AP236 furniture catalog and interior design, 2004-03-02; Panetto, Hervé
  3. WG3 N1337 - ISO/CD-TS 10303-436 source document, STEP Part 436, Application module: AP236 furniture catalog and interior design, 2005-03-18; Gonçalves, Ricardo
  4. WG3 N1336 - Project leader approval checklist for PLCS Ballot Cycle 3, Product conformance class modules (AM 1292/1357), 2003-05-23; Dunford, John
  5. WG3 N1335 - Internal review checklist for PLCS Ballot Cycle 3, Product conformance class modules (AM 1292/1357), 2003-04-30; Robb, Gordon and Turner, Tim
  6. WG3 N1334 - EXPRESS ARM long form for ISO/CD-TS 10303-1355, STEP Part 1355, Application module: Parameterized catalog data and shape representation, 2005-03-02; Olavo, Ricardo
  7. WG3 N1333 - EXPRESS MIM long form for ISO/CD-TS 10303-1355, STEP Part 1355, Application module: Parameterized catalog data and shape representation, 2005-03-02; Olavo, Ricardo
  8. WG3 N1332 - EXPRESS MIM short form for ISO/CD-TS 10303-1355, STEP Part 1355, Application module: Parameterized catalog data and shape representation, 2004-03-02; Panetto, Hervé
  9. WG3 N1331 - EXPRESS ARM short form for ISO/CD-TS 10303-1355, STEP Part 1355, Application module: Parameterized catalog data and shape representation, 2004-03-02; Panetto, Hervé
  10. WG3 N1330 - ISO/CD-TS 10303-1355 source document, STEP Part 1355, Application module: Parameterized catalog data and shape representation, 2005-03-18; Gonçalves, Ricardo
    WG3 N-Docs 1320 - 1329 (0 entries 9 subfolders)
This folder contains:
  1. WG3 N1329 -
  2. WG3 N1328 - ISO/FDIS 15926-2 Lifecycle integration of process plant data including oil and gas production facilities: Data model: EXPRESS and EXPRESS-G listing, 2003-07-09; West, Matthew
  3. WG3 N1327 - EXPRESS ARM long form for ISO/CD-TS 10303-1354, STEP Part 1354, Application module: Furniture interior decoration, 2005-03-09; Olavo, Ricardo
  4. WG3 N1326 - EXPRESS MIM long form for ISO/CD-TS 10303-1354, STEP Part 1354, Application module: Furniture interior decoration, 2005-03-09; Olavo, Ricardo
  5. WG3 N1325 - EXPRESS MIM short form for ISO/CD-TS 10303-1354, STEP Part 1354, Application module: Furniture interior decoration, 2004-03-02; Panetto, Hervé
  6. WG3 N1324 - EXPRESS ARM short form for ISO/CD-TS 10303-1354, STEP Part 1354, Application module: Furniture interior decoration, 2004-03-02; Panetto, Hervé
  7. WG3 N1323 - ISO/CD-TS 10303-1354 source document, STEP Part 1354, Application module: Furniture interior decoration, 2005-03-18; Gonçalves, Ricardo
  8. WG3 N1322 - EXPRESS ARM long form for ISO/CD TS 10303-0403, STEP Part 403, Application module: AP203 Configuration controlled 3D design of mechanical parts and assemblies, 2003-07-31; Anderson, Bill
  9. WG3 N1321 - Abstract for ISO/FDIS 115926-0002, Process Plants, Part 2, Data model, 2003-06-09; Sullivan, Jan
  10. WG3 N1320 - EXPRESS ARM long form for ISO/CD-TS 10303-1353, STEP Part 1353, Application module: Parameterized catalog data information, 2005-03-02; Olavo, Ricardo
    WG3 N-Docs 1310 - 1319 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1319 - EXPRESS MIM long form for ISO/CD-TS 10303-1353, STEP Part 1353, Application module: Parameterized catalog data information, 2005-03-02; Olavo, Ricardo
  2. WG3 N1318 - EXPRESS MIM short form for ISO/CD-TS 10303-1353, STEP Part 1353, Application module: Parameterized catalog data information, 2004-03-02; Panetto, Hervé
  3. WG3 N1317 - EXPRESS ARM short form for ISO/CD-TS 10303-1353, STEP Part 1353, Application module: Parameterized catalog data information, 2004-03-02; Panetto, Hervé
  4. WG3 N1316 - ISO/CD-TS 10303-1353 source document, STEP Part 1353, Application module: Parameterized catalog data information, 2005-03-18; Gonçalves, Ricardo
  5. WG3 N1315 - ISO/CD-TS 10303-436/1351/1352/1353/1354/1355 source and supporting documents, STEP AP236 CC Modules Ballot Package, 2005-03-18; Radack, Gerald
  6. WG3 N1314 - Convener approval checklist for ISO/CD-TS 10303-1352, STEP Part 1352, Application module: Catalog data information and shape representation, 2005-03-22; Radack, Gerald
  7. WG3 N1313 - EXPRESS ARM long form for ISO/CD-TS 10303-1352, STEP Part 1352, Application module: Catalog data information and shape representation, 2005-03-02; Olavo, Ricardo
  8. WG3 N1312 - EXPRESS MIM long form for ISO/CD-TS 10303-1352, STEP Part 1352, Application module: Catalog data information and shape representation, 2005-02-28; Olavo, Ricardo
  9. WG3 N1311 - EXPRESS MIM short form for ISO/CD-TS 10303-1352, STEP Part 1352, Application module: Catalog data information and shape representation, 2004-03-02; Panetto, Hervé
  10. WG3 N1310 - EXPRESS ARM short form for ISO/CD-TS 10303-1352, STEP Part 1352, Application module: Catalog data information and shape representation, 2004-03-02; Panetto, Hervé
    WG3 N-Docs 1300 - 1309 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1309 - ISO/CD-TS 10303-1352 source document, STEP Part 1352, Application module: Catalog data information and shape representation, 2005-03-18; Gonçalves, Ricardo
  2. WG3 N1308 - Project leader approval checklist for ISO/CD-TS 10303-436/1351/1352/1353/1354/1355, STEP AP236 CC Modules Package, 2005-03-21; Gonçalves, Ricardo
  3. WG3 N1307 - Internal review checklist for ISO/CD-TS 10303-436/1351/1352/1353/1354/1355, STEP AP236 CC Modules Package, 2005-03-21; Nunyez, Maria Jose
  4. WG3 N1306 - EXPRESS ARM long form for ISO/CD-TS 10303-1351, STEP Part 1351, Application module: Catalog data information, 2005-03-02; Olavo, Ricardo
  5. WG3 N1305 - EXPRESS MIM long form for ISO/CD-TS 10303-1351, STEP Part 1351, Application module: Catalog data information, 2005-02-28; Olavo, Ricardo
  6. WG3 N1304 - EXPRESS MIM short form for ISO/CD-TS 10303-1351, STEP Part 1351, Application module: Catalog data information, 2005-02-02; Liutkus, Giedrius
  7. WG3 N1303 - EXPRESS ARM short form for ISO/CD-TS 10303-1351, STEP Part 1351, Application module: Catalog data information, 2004-11-23; Olavo, Ricardo
  8. WG3 N1302 - ISO/CD-TS 10303-1351 source document, STEP Part 1351, Application module: Catalog data information, 2005-03-18; Gonçalves, Ricardo
  9. WG3 N1301 -
  10. WG3 N1300 -
    WG3 N-Docs 1290 - 1299 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1299 - EXPRESS schema for ISO/FDIS 15926-002, Process Plants, Part 2, Data model, 2003-04-17; Sullivan, Jan
  2. WG3 N1298 - Convener approval checklist for ISO/FDIS 15926-002, Process Plants, Part 2, Data model, 2003-05-27; Radack, Gerald
  3. WG3 N1297 - Project leader approval checklist for ISO/FDIS 15926-002, Process Plants, Part 2, Data model, 2003-04-12; Sullivan, Jan
  4. WG3 N1296 - Internal review checklist for ISO/FDIS 15926-002, Process Plants, Part 2, Data model, 2003-05-16; Price, David
  5. WG3 N1295 - ISO/FDIS 15926-002:2003(E) source document, Process Plants, Part 2, Data model, 2003-04-17; Sullivan, Jan
    This document is © ISO. This document supersedes: ISO TC184/SC4/WG3 N1037.
  6. WG3 N1294 - Convener approval checklist for ISO/FDIS 15926-001, Integration of life-cycle data for process plants including oil & gas facilities, Part 1: Overview and fundamental principles, 2003-09-23; Radack, Gerald
  7. WG3 N1293 - Project leader approval checklist for ISO/FDIS 15926-001, Integration of life-cycle data for process plants including oil & gas facilities, Part 1: Overview and fundamental principles, 2003-09-20; Sandsmark, Nils
  8. WG3 N1292 - Internal review checklist for ISO/FDIS 15926-001, Integration of life-cycle data for process plants including oil & gas facilities, Part 1: Overview and fundamental principles, 2003-04-30; Price, David
  9. WG3 N1291 - ISO/FDIS 15926-001 source document, Integration of life-cycle data for process plants including oil & gas facilities, Part 1: Overview and fundamental principles, 2003-09-23; Sandsmark, Nils
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N1020.
  10. WG3 N1290 - ISO/DIS 15926-002 Ballot comment resolution log, Process Plants, Part 2, Data model 2003-04-11; Sullivan, Jan
    WG3 N-Docs 1280 - 1289 (0 entries 5 subfolders)
This folder contains:
  1. WG3 N1289 -
  2. WG3 N1288 - EXPRESS schema with comments for ISO/FDIS 15926-0002, Process Plants, Part 2, Data model, 2003-04-17; Sullivan, Jan
  3. WG3 N1287 -
  4. WG3 N1286 -
  5. WG3 N1285 - Internal review checklist for ISO/CD TS 10303-1307, STEP Part 1307, Application module: Ap239 work definition, 2003-05-13; Orton, Dave
  6. WG3 N1284 -
  7. WG3 N1283 -
  8. WG3 N1282 - MIM EXPRESS for ISO/CD TS 10303-1307, STEP Part 1307, Application module: Ap239 work definition, 2003-07-25; Dunford, John
  9. WG3 N1281 - ARM EXPRESS for ISO/CD TS 10303-1307, STEP Part 1307, Application module: Ap239 work definition, 2003-07-25; Dunford, John
  10. WG3 N1280 - ISO/CD TS 10303-1307 source document, STEP Part 1307, Application module: Ap239 work definition, 2003-07-25; Dunford, John
    WG3 N-Docs 1270 - 1279 (0 entries 4 subfolders)
This folder contains:
  1. WG3 N1279 -
  2. WG3 N1278 -
  3. WG3 N1277 -
  4. WG3 N1276 - Internal review checklist for PLCS ballot cycle 3, Work management package, ISO/CD TS 10303-1306, STEP Part 1306, Application module: Ap239 task specification resourced, 2003-05-19; Orton, Dave
  5. WG3 N1275 -
  6. WG3 N1274 -
  7. WG3 N1273 - MIM EXPRESS for ISO/CD TS 10303-1306, STEP Part 1306, Application module: Ap239 task specification resourced, 2003-07-25; Dunford, John
  8. WG3 N1272 - ARM EXPRESS for ISO/CD TS 10303-1306, STEP Part 1306, Application module: Ap239 task specification resourced, 2003-07-25; Dunford, John
  9. WG3 N1271 - ISO/CD TS 10303-1306 source document, STEP Part 1306, Application module: Ap239 task specification resourced, 2003-07-25; Dunford, John
  10. WG3 N1270 -
    WG3 N-Docs 1260 - 1269 (0 entries 0 subfolders)
This folder contains:
  1. WG3 N1269 -
  2. WG3 N1268 -
  3. WG3 N1267 -
  4. WG3 N1266 -
  5. WG3 N1265 -
  6. WG3 N1264 -
  7. WG3 N1263 -
  8. WG3 N1262 -
  9. WG3 N1261 -
  10. WG3 N1260 -
    WG3 N-Docs 1250 - 1259 (0 entries 0 subfolders)
This folder contains:
  1. WG3 N1259 -
  2. WG3 N1258 -
  3. WG3 N1257 -
  4. WG3 N1256 -
  5. WG3 N1255 -
  6. WG3 N1254 -
  7. WG3 N1253 -
  8. WG3 N1252 -
  9. WG3 N1251 -
  10. WG3 N1250 -
    WG3 N-Docs 1240 - 1249 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N1249 -
  2. WG3 N1248 -
  3. WG3 N1247 -
  4. WG3 N1246 -
  5. WG3 N1245 -
  6. WG3 N1244 -
  7. WG3 N1243 - Convener approval checklist for PLCS Ballot Cycle 4 - Product Life Cycle Support, 2003-08-08; Radack, Gerald
  8. WG3 N1242 - Project leader approval checklist for PLCS Ballot Cycle 4 - Product Life Cycle Support, 2003-07-24; Hendrix, Tom
  9. WG3 N1241 - Internal review checklist for PLCS Ballot Cycle 4 - Product Life Cycle Support, 2003-07-23; Gyllstrom, Leif and Nettles, Darla
  10. WG3 N1240 -
    WG3 N-Docs 1230 - 1239 (0 entries 6 subfolders)
This folder contains:
  1. WG3 N1239 -
  2. WG3 N1238 -
  3. WG3 N1237 -
  4. WG3 N1236 -
  5. WG3 N1235 - Resolution of SEDS Against ISO 10303-214, STEP Part 214, Application protocol: Core data for automotive mechanical design processes, 2003-02-25; Pfeifer-Silberbach, Ullrich
  6. WG3 N1234 - SEDRES-AP233 WD #5 Overview pack v4, 2003-02-12; Julian Johnson, Mark Taylor
  7. WG3 N1233 - Abstract for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-12-14; Lazo, Peter
  8. WG3 N1232 - AIM EXPRESS long form for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-12-14; Lazo, Peter
  9. WG3 N1231 - AIM EXPRESS short form for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-12-14; Lazo, Peter
  10. WG3 N1230 - ARM EXPRESS for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-12-14; Lazo, Peter
    WG3 N-Docs 1220 - 1229 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N1229 - Convener approval checklist for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-12-15; Radack, Gerald
  2. WG3 N1228 - Project leader approval checklist for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-05-22; Lazo, Peter
  3. WG3 N1227 - Internal review checklist for ISO/IS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2003-05-15; Lazo, Peter
  4. WG3 N1226 - ISO/IS 10303-215 source document, STEP Part 215, Application protocol: Ship arrangement, 2003-12-14; Lazo, Peter
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG3 N1093.
  5. WG3 N1225 -
  6. WG3 N1224 -
  7. WG3 N1223 - STEP-NC Implementation -- ARM or AIM? 2003-02-12; Barnard-Feeney, Allison
  8. WG3 N1222 - EXPRESS G Diagram for ISO/FDIS 15926-0002, Process Plants, Part 2, Data model, 2003-04-17; Sullivan, Jan
  9. WG3 N1221 - EXPRESS MIM long form for ISO/CD TS 10303-1213, STEP Part 1213, Application module: Reference data library, 2003-12-29; Bodington, Rob
  10. WG3 N1220 -
    WG3 N-Docs 1210 - 1219 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1219 - EXPRESS MIM long form for ISO/CD TS 10303-1151, STEP Part 1151, Application module: Functional data, 2003-12-29; Bodington, Rob
  2. WG3 N1218 - EXPRESS MIM long form for ISO/CD TS 10303-421, STEP Part 421, Application module: Functional data and schematic representation, 2003-12-29; Bodington, Rob
  3. WG3 N1217 -EXPRESS MIM short form for ISO/CD TS 10303-1213, STEP Part 1213, Application module: Reference data library, 2004-01-29; Leal, David
  4. WG3 N1216 -
  5. WG3 N1215 - EXPRESS MIM short form for ISO/CD TS 10303-1151, STEP Part 1151, Application module: Functional data, 2004-01-29; Leal, David
  6. WG3 N1214 - EXPRESS MIM short form for ISO/CD TS 10303-421, STEP Part 421, Application module: Functional data and schematic representation, 2004-01-29; Leal, David
  7. WG3 N1213 - EXPRESS ARM short form for ISO/CD TS 10303-1213, STEP Part 1213, Application module: Reference data library, 2004-01-29; Leal, David
  8. WG3 N1212 -
  9. WG3 N1211 - EXPRESS ARM short form for ISO/CD TS 10303-1151, STEP Part 1151, Application module: Functional data, 2004-01-29; Leal, David
  10. WG3 N1210 - EXPRESS ARM short form for ISO/CD TS 10303-421, STEP Part 421, Application module: Functional data and schematic representation, 2004-01-29; Leal, David
    WG3 N-Docs 1200 - 1209 (0 entries 9 subfolders)
This folder contains:
  1. WG3 N1209 - Convener approval checklist for ISO/CD TS 10303-421/1151/1213, STEP AM Functional data and schematic representation modules package, 2004-02-02; Radack, Gerald
  2. WG3 N1208 - Project leader approval checklist for ISO/CD TS 10303-421/1151/1213, STEP AM Functional data and schematic representation modules package, 2004-01-26; van Renssen, Andries
  3. WG3 N1207 - Internal review checklist for ISO/CD TS 10303-421/1151/1213, STEP AM Functional data and schematic representation modules package, 2003-12-30; Leal, David
  4. WG3 N1206 - ISO/CD TS 10303-1213 source document, STEP Part 1213, Application module: Reference data library, 2004-01-29; van Renssen, Andries
  5. WG3 N1205 -
  6. WG3 N1204 - ISO/CD TS 10303-1151 source document, STEP Part 1151, Application module: Functional data, 2004-01-29; van Renssen, Andries
  7. WG3 N1203 - ISO/CD TS 10303-421 source document, STEP Part 421, Application module: Functional data and schematic representation, 2004-01-29; van Renssen, Andries
  8. WG3 N1202 - EXPRESS MIM long form for ISO/CD TS 10303-0403, STEP Part 403, Application module: AP203 Configuration controlled 3D design for mechanical parts and assemblies, 2003-07-31; Anderson, Bill
  9. WG3 N1201 - Convener approval checklist for ISO/CD 10303-0203 ed2, and ISO/CD TS 10303-0403 ed1, STEP Part 203, Application protocol: Application module: Configuration controlled 3D designs of mechanical parts and assemblies, and STEP Part 403, Application module: AP203 Configuration controlled 3D designs of mechanical parts and assemblies, 2003-08-29; Radack, Gerald
  10. WG3 N1200 - Project leader approval checklist for ISO/CD 10303-0203 ed2, and ISO/CD TS 10303-0403 ed1, STEP Part 203, Application protocol: Application module: Configuration controlled 3D designs of mechanical parts and assemblies, and STEP Part 403, Application module: AP203 Configuration controlled 3D designs of mechanical parts and assemblies, 2003-08-20; Frechette, Simon
    WG3 N-Docs 1190 - 1199 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N1199 - Internal review checklist for ISO/CD 10303-0203 ed2, and ISO/CD TS 10303-0403 ed1, STEP Part 203, Application protocol: Application module: Configuration controlled 3D designs of mechanical parts and assemblies, and STEP Part 403, Application module: AP203 Configuration controlled 3D designs of mechanical parts and assemblies, 2003-08-11; Nettles, Darla
  2. WG3 N1198 - EXPRESS MIM for ISO/CD TS 10303-0403, STEP Part 403, Application module: AP203 Configuration controlled 3D design for mechanical parts and assemblies, 2003-08-11; Anderson, Bill
  3. WG3 N1197 - EXPRESS ARM for ISO/CD TS 10303-0403, STEP Part 403, Application module: AP203 Configuration controlled 3D design for mechanical parts and assemblies, 2003-08-11; Anderson, Bill
  4. WG3 N1196 - ISO/CD TS 10303-0403 source document, STEP Part 403, Application module: AP203 Configuration controlled 3D design for mechanical parts and assemblies, 2003-08-11; Anderson, Bill
  5. WG3 N1195 - ISO/CD 10303-0203 ed2 source document, STEP Part 203, Application module: Configuration controlled 3D design for mechanical parts and assemblies, 2003-08-20; Anderson, Bill
  6. WG3 N1194 -
  7. WG3 N1193 -
  8. WG3 N1192 - Convener approval checklist for PLCS Ballot Cycle 3, Work Management Package (AM 1292/1306/1307) 2003-07-11; Radack, Gerald
  9. WG3 N1191 - Project leader approval checklist for PLCS Ballot Cycle 3, Work Management Package (AM 1258/1306/1307/1286/1285) 2003-05-28; Dunford, John
  10. WG3 N1190 -
    WG3 N-Docs 1180 - 1189 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1189 - Modules and modular APs, 2003-01-10; Dunford, John
  2. WG3 N1188 -
  3. WG3 N1187 - Convener Approval Checklist for ISO/CD TS 10303-1292/1293, STEP Part 1292, Application module: Ap239 product definition information and STEP Part 1293, Application module: Ap239_part_definition_information, 2003-05-15; Radack, Gerald
  4. WG3 N1186 - Project Leader Approval Checklist for ISO/CD TS 10303-1293, STEP Part 1293, Application module: Ap239_part_definition_information, 2003-03-03; Kreiler, Chris
  5. WG3 N1185 - Internal Review Checklist for ISO/CD TS 10303-1293, STEP Part 1293, Application module: Ap239_part_definition_information, 2003-02-19; Robb, Gordon and Turner, Tim
    This SC4 part belongs to PLCS Ballot Cycle 2 Package, PLCS Product CC modules (1293)
  6. WG3 N1184 - MIM EXPRESS for ISO/CD TS 10303-1293, STEP Part 1293, Application module: Ap239 part definition information, 2003-04-04; Dunford, John
  7. WG3 N1183 - ARM EXPRESS for ISO/CD TS 10303-1293, STEP Part 1293, Application module: Ap239 part definition information, 2003-04-04; Dunford, John
  8. WG3 N1182 - ISO/CD TS 10101-1293 source document, STEP Part 1293, Application module: Ap239 part definition information, 2003-04-04; Dunford, John
  9. WG3 N1181 - MIM EXPRESS for ISO/CD TS 10303-1292, STEP Part 1292, Application module: AP239 product definition information, 2003-07-25; Dunford, John
  10. WG3 N1180 - ARM EXPRESS for ISO/CD TS 10303-1292, STEP Part 1292, Application module: AP239 product definition information, 2003-07-25; Dunford, John
    WG3 N-Docs 1170 - 1179 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1179 - ISO/CD TS 10303-1292 source document, STEP Part 1292, Application module: AP239 product definition information, 2003-07-25; Dunford, John
  2. WG3 N1178 - Minutes of AP 236 Meetings, Seoul, Korea, 2002-11-02 to 2002-11-08, Gonçalves, Ricardo, 2002-11-19
  3. WG3 N1177 - Minutes of WG3/T22, Building and Construction, Seoul, Korea, 2002-11-04 to 2002-11-07 , Wolfgang Haas, 2002-11-19
  4. WG3 N1176 - Minutes of WG3/T24, Manufacturing, Seoul, Korea, 2002-11-04 to 2002-11-07 , Fred Proctor, 2002-12-03
  5. WG3 N1175 - Test cases for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-01--06; Slovensky, Len
  6. WG3 N1174 - Convener approval checklist for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-01-03; Radack, Gerald M.
  7. WG3 N1173 - Project leader approval checklist for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2002-12-12; Slovensky, Len
  8. WG3 N1172 - Internal review checklist for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2002-12-11; Sakamoto, Chiaki
  9. WG3 N1171 - Validation report for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-01-03; Slovenksy, Len
  10. WG3 N1170 - Short names for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-01-03; Slovensky, Len
    WG3 N-Docs 1160 - 1169 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1169 - AIM EXPRESS long form for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2003-01-03; Slovensky, Len
  2. WG3 N1168 - AIM EXPRESS short form for ISO/CD 10303-240, STEP Part 240, Application protocol: Process plans for machined products, 2002-01-09; Radack, Gerald M.
  3. WG3 N1167- ISO/CD 10303-240 source document, STEP Part 240, Application protocol: Process plans for machined products, 2003-01-03; Sakamoto,Chiaki
  4. WG3 N1166 - Integrated Application Activity Model (AAM) for Product Life Cycle Support, 2002-07-11; John Dunford,
  5. WG3 N1165 - AP 214 edition 2 status (slides) WG3 Plenary, 2002-11-04; Ungerer, Max
  6. WG3 N1164 - Contents of a Modular AP, 2002-11-04; Bodington, Rob,
  7. WG3 N1163 - Minutes of WG3/T23, Ships, Seoul, Korea, 2002-11-04 to 2002-11-07, 2002-11-14; Kendall, John,
  8. WG3 N1162 - AP203 Edition 2: Configuration Controlled 3D Design of Mechanical Parts and Assemblies, 2002-11-05; Graves, Gerry,
  9. WG3 N1161 - Minutes of WG3, Seoul, Korea, 2002-11-04 to 2002-11-07, 2002-11-15; Radack, Gerald
  10. WG3 N1160 - ARM EXPRESS for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechanical design processes, 2003-01-16; Pfeifer-Sliberbach, Ullrich
    WG3 N-Docs 1150 - 1159 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1159 - Short names for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechanical design processes, 2003-01-16; Pfeifer-Silberbach, Ullrich
  2. WG3 N1158 - Convener approval checklist for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechnical design processes, 2003-02-26; Radack, Gerald
  3. WG3 N1157 - Project leader approval checklist for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechnical design processes, 2003-02-06; Ungerer, Max
  4. WG3 N1156 - Internal review checklist for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechnical design processes, 2002-11-18; Pfeifer-Silberbach, Ullrich
  5. WG3 N1155 - AIM long form for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechnical design processes, 2003-01-16; Pfeifer-Silberbach, Ullrich
  6. WG3 N1154 - AIM Short Form for ISO/FDIS 10303-214 ed2, STEP Part 214, Application protocol: Core data for automotive mechnical design processes, 2003-01-16; Pfeifer-Silberbach, Ullrich
  7. WG3 N1153 - ISO/FDIS 10303-214 ed2 source document, STEP Part 214, Application protocol: Core data for automotive mechanical design processes, 2003-02-02; Ungerer, Max
    This document is © ISO. This document supersedes ISO TC184/SC4 WG3N931.
  8. WG3 N1152 - Abstract for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-12-23; Downie, Blair
  9. WG3 N1151 - AIM short names for ISO/DIS 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration 2002-10-24; Gilbert, Mitch
  10. WG3 N1150 - Convener approval checklist for ISO/DIS 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration 2002-12-20; Radack, Gerald M.
    WG3 N-Docs 1140 - 1149 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1149 - Project leader approval checklist for ISO/DIS 10303-227 ed2, STEP Part 227, Application protocol: Plant spatial configuration, 2002-12-04; Palmer, Mark
  2. WG3 N1148 - Internal review checklist for ISO/DIS 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, , 2002-10-22; Gischner, Burton
  3. WG3 N1147 - Validation report for ISO/DIS 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, 2002-12-20; Palmer, Mark
  4. WG3 N1146 - ISO Form 13B Report of Voting/Annex B (Issues Log) for ISO/DIS 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, 2002-12-20; Palmer, Mark
  5. WG3 N1145 - AIM EXPRESS short form for ISO/DIS 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, 2002-10-24; Gilbert, Mitch
  6. WG3 N1144 - ISO/DIS 10303-227, ed2, STEP Part 227, Application protocol: Plant spatial configuration, 2002-12-16; Palmer, Mark
    This document is © ISO. This document supersedes WG3N1088.
  7. WG3 N1143 - Test case definition (Rev C) for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms 2001-12-18; Benthall, Larry
  8. WG3 N1142 - Short names for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-09-18; Downie, Blair
  9. WG3 N1141 - ARM long form for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-09-18; Downie, Blair
  10. WG3 N1140 - Convener approval checklist for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-12-23; Radack, Gerald M.
    WG3 N-Docs 1130 - 1139 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1139 - Project leader approval checklist for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-12-23; Turner, Tim
  2. WG3 N1138 - Internal review checklist for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-09-18; Downie, Blair
  3. WG3 N1137 - Validation report for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-09-18; Turner, Tim
  4. WG3 N1136 - Issues log for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-09-18; Downie, Blair
  5. WG3 N1135 - AIM short form for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-11-26; Downie, Blair
  6. WG3 N1134 - AIM long form for ISO/IS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2002-11-26; Downie, Blair
  7. WG3 N1133 - ISO/IS 10303-216, STEP Part 216: Application protocol: Ship moulded forms, 2002-12-21; Turner, Tim
    This document is © ISO. This document supersedes WG3N1030.
  8. WG3 N1132 -
  9. WG3 N1131 -
  10. WG3 N1130 - Minutes of WG3 T22, Stockholm, Sweden, 2002-06-10 to 2002-06-13 2002-06-24; Haas, Wolfgang
    WG3 N-Docs 1120 - 1129 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1129 -
  2. WG3 N1128 - Minutes of WG3 T1 and WG12 Shape Representation, Stockholm, Sweden, 2002-06-10 to 2002-06-14
  3. WG3 N1127 - Minutes of WG3, Stockholm, Sweden, 2002-06-10 to 2002-06-13
  4. WG3 N1126 - The MultiView program in a nutshell
  5. WG3 N1125 - Test case definition for ISO/DIS 10303-215
  6. WG3 N1124 - Short names for ISO/DIS 10303-215
  7. WG3 N1123 - ARM long form for ISO/DIS 10303-215
  8. WG3 N1122 - Guidelines for developing SC4 test suites
  9. WG3 N1121 - Short names for ISO/DIS 10303-218 STEP Part 218, Application protocol: Ship structures, 2002-05-28; Grau, Matthias
  10. WG3 N1120 - ARM EXPRESS for ISO/DIS 10303-218 STEP Part 218, Application protocol: Ship structures, 2002-05-28; Grau, Matthias
    WG3 N-Docs 1110 - 1119 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1119 - AIM EXPRESS long form for ISO/DIS 10303-227 ed. 2 STEP Part 227, Application Protocol: Plant spatial configuration, 2002-10-24; Gilbert, Mitch
  2. WG3 N1118 - AIM EXPRESS short form for ISO/DIS 10303-218 STEP Part 218, Application protocol: Ship structures 2002-05-28; Grau, Matthias
  3. WG3 N1117 - Convener approval checklist for ISO/CD 10303-238 STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-06-03; Radack,Gerald
  4. WG3 N1116 - Project leader approval checklist for ISO/CD 10303-238 STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-05-01; Crawford, Alan
  5. WG3 N1115 - Internal review checklist for ISO/CD 10303-238 STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-04-19; Loffredo, David
  6. WG3 N1114 - Validation report for ISO/CD 10303-238 STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-04-24; Loffredo, David
  7. WG3 N1113 - Short names for ISO/CD 10303-238 STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-04-24; Loffredo, David
  8. WG3 N1112 - AIM EXPRESS long form for ISO/CD 10303-238, STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-04-24; Loffredo, David
  9. WG3 N1111 - AIM EXPRESS short form for ISO/CD 10303-238, STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-04-24; Loffredo, David
  10. WG3 N1110 - ISO/CD 10303-238, Product data representation and exchange -- STEP Part 238: Application protocol: Application interpreted model for computerized numerical controllers, 2002-05-30; Loffredo, David
    WG3 N-Docs 1100 - 1109 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1109 - ISO/CD TS 15926-7 source document, Process Plants Part 7, Implementation methods for the integration of distributed systems, 2005-04-20; Pruijn, Peter Paul
  2. WG3 N1108 - Minutes of WG3 T22 -- Building & Construction -- Myrtle Beach, SC, USA -- 2002-02-25 to 2002-02-28 2002-03-13; Haas, Wolfgang
  3. WG3 N1107 - Minutes of WG3 T23 -- Ships -- Myrtle Beach, SC, USA -- 2002-02-25 to 2002-02-28 2002-03-11; Mays, James L.
  4. WG3 N1106 - ISO/WD 10303-236 source document, STEP Part 236, Furniture product data and project data, 2002-07-22; Gonçalves, Ricardo
  5. WG3 N1105 - Minutes of T20 -- Process Plant -- and T21 -- Oil and Gas -- Myrtle Beach, SC, USA -- 2002-02-26 to 2002-02-27 2002-05-15; van Exel, Paul
  6. WG3 N1104 - ISO/WD 10303-235, STEP Part 236, Application protocol: Material properties for product design and validation undated; originator unidentified
  7. WG3 N1103 - Requirements definition document for intelligent schematics standards, undated; Ishikawa, Yoshiaki
  8. WG3 N1102 - AIC -- Machining feature definitions, undated; Slovensky, Len
  9. WG3 N1101 - AIC -- Machining features, undated; Slovensky, Len
  10. WG3 N1100 - Convener approval checklist for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-06-19; Radack, Gerald
    WG3 N-Docs 1090 - 1099 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1099 - Project Leader Approval Checklist for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-04-21; Lazo, Peter
  2. WG3 N1098 - Internal review checklist for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-04-21; Lazo, Peter
  3. WG3 N1097 - Validation report for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-06-19; Lazo, Peter
  4. WG3 N1096 - Issues log for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-06-17; Lazo, Peter
  5. WG3 N1095 - AIM short form for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-06-19; Lazo, Peter
  6. WG3 N1094 - AIM long form for ISO/DIS 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2002-06-19; Lazo, Peter
  7. WG3 N1093 - ISO/DIS 10303-215 source document, STEP Part 215, Application protocol: Ship arrangement, 2002-06-19; Lazo, Peter
    Source documents in this folder are copyright (©) ISO. SC4ONLINE credentials are needed to access these documents.
  8. WG3 N1092 - Short names for ISO/NWI 10303-338, STEP Part 338, Abstract test suite: STEP NC undated; Loffredo, Dave
  9. WG3 N1091 - AIM long form for ISO/NWI 10303-338, STEP Part 338, Abstract test suite: STEP NC undated; Loffredo, Dave
  10. WG3 N1090 - AIM short form for ISO/NWI 10303-338, STEP Part 338, Abstract test suite: STEP NC undated; Loffredo, Dave
    WG3 N-Docs 1080 - 1089 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N1089 - Application interpreted model (AIM) for computerized numerical controllers, ISO/NWI 10303-338, STEP Part 338, Abstract test suite: STEP NC undated; Loffredo, Dave
  2. WG3 N1088 - Reserved for ISO 10303-227 minor corrections, STEP Part 227, Application protocol: Plant spatial configuration, undated; Radack, Gerald
  3. WG3 N1087 - Reserved for ISO 10303-227 minor corrections, STEP Part 227, Application protocol: Plant spatial configuration, undated; Radack, Gerald
  4. WG3 N1086 - Validation report for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures, 2002-04-11; Slovensky, Len
  5. WG3 N1085 - Issue log for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures, 2002-04-11; Grau, Matthias
  6. WG3 N1084 - AIM EXPRESS long form for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures, 2002-05-28; Grau, Matthias
  7. WG3 N1083 - Convener approval checklist for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures 2002-05-29; Radack, Gerald
  8. WG3 N1082 - Project leader approval checklist for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures, 2002-04-30; Grau, Matthias
  9. WG3 N1081 - Internal review checklist for ISO/DIS 10303-218, STEP Part 218, Application protocol: Ship structures, 2002-04-09; Gischner, Burton
  10. WG3 N1080 - ISO/DIS 10303-218 source document, Product data representation and exchange -- Application protocol: Ship structures, 2002-05-28; Grau, Matthias
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG3N877.
    WG3 N-Docs 1070 - 1079 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1079 - Issues log (Form 13B) for ISO/TS 10303-332, STEP Part 332, Abstract test suite: Technical data packaging: core information and exchange, undated; Clark, Jim
  2. WG3 N1078 - Convener approval checklist for ISO/TS 10303-332, STEP Part 332, Abstract test suite: Technical data packaging: core information and exchange, undated; Radack, Gerald
  3. WG3 N1077 - Project leader approval checklist for ISO/TS 10303-332, STEP Part 332, Abstract test suite: Technical data packaging: core information and exchange, undated; originator unidentified
  4. WG3 N1076 - Internal review checklist for ISO/TS 10303-332, STEP Part 332, Abstract test suite: Technical data packaging: core information and exchange, undated; originator unidentified
  5. WG3 N1075 - ISO/TS 10303-332 source document, STEP Part 332, Abstract test suite: Technical data packaging: core information and exchange, undated; originator unidentified
  6. WG3 N1074 - ISO/IS 10303-227 source document, STEP Part 227, Application protocol: Plant spatial configuration, 2001-11-20; Palmer, Mark
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG3N792.
  7. WG3 N1073 - Validation report for ISO/CD 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, undated; Palmer, Mark
  8. WG3 N1072- Issues log for ISO/CD 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration 2001-11-20; Palmer, Mark
  9. WG3 N1071 - Convener approval checklist for ISO/CD 10303-227, ed2, STEP Part 227, Application protocol: Plant spatial configuration, 2001-11-20; Radack, Gerald
  10. WG3 N1070 - Project leader approval checklist for ISO/CD 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, undated; Palmer, Mark
    WG3 N-Docs 1060 - 1069 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1069 - Internal Review Checklist for ISO/CD 10303-227 ed. 2, STEP Part 227, Application protocol: Plant spatial configuration, 2001-11-20; Gerald Radack
  2. WG3 N1068 - AIM long form (EXPRESS Schema) for ISO/CD 10303-227 ed 2, STEP Part 227, Application protocol: Plant spatial configuration, undated, Palmer, Mark
  3. WG3 N1067 - Convener approval checklist for ISO/FDIS 10303-204, STEP Part 204, Application protocol: Mechanical design using boundary representation, undated; Radack, Gerald
  4. WG3 N1066 - ISO/IS 10303-232,STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Ziolko, Glen A.
    This document is © ISO.
  5. WG3 N1065 - Issues log for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Ziolko, Glen A.
  6. WG3 N1064 - Validation report for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Ziolko, Glen A.
  7. WG3 N1063 - AIM long form for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Ziolko, Glen A.
  8. WG3 N1062 - AIM short form for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Ziolko, Glen A.
  9. WG3 N1061 - Convener approval checklist for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Radack, Gerald
  10. WG3 N1060 - Project leader approval checklist for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Ziolko, Glen A.
    WG3 N-Docs 1050 - 1059 (0 entries 10 subfolders)
This folder contains:
  1. WG3 N1059 - Internal review checklist for ISO/IS 10303-232, STEP Part 232, Application protocol: Technical data packaging: core information and exchange, undated; Crusey, Jesse L.
  2. WG3 N1058 - Task dictionary for ISO/CD 10303-226 (P21 format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  3. WG3 N1057 - Task dictionary for ISO/CD 10303-226 (XML format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  4. WG3 N1056 - Product anomaly dictionary for ISO/CD 10303-226 (P21 format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  5. WG3 N1055 - Product anomaly dictionary for ISO/CD 10303-226 (XML format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  6. WG3 N1054 - Mechanical product dictionary for ISO/CD 10303-226 (P21 format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  7. WG3 N1053 - Mechanical product dictionary for ISO/CD 10303-226 (XML format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  8. WG3 N1052 - Material dictionary for ISO/CD 10303-226 (P21 format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  9. WG3 N1051 - Material dictionary for ISO/CD 10303-226 (XML format), STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  10. WG3 N1050 - Validation report for ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems, undated; Bazari, Z.
    WG3 N-Docs 1040 - 1049 (0 entries 10 subfolders)

This folder contains:

  1. WG3 N1049 - AIM EXPRESS long form for ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems, undated; Bazari, Z.
  2. WG3 N1048 - Issues log for ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems, undated; Bazari, Z.
  3. WG3 N1047 - Convener approval checklist for ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  4. WG3 N1046 - Project leader approval checklist for ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems, undated; Bazari, Z.
  5. WG3 N1045 - Internal review checklist for ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems, undated; Radack, Gerald
  6. WG3 N1044 - ISO/CD 10303-226 document, STEP Part 226, Application protocol: Ship mechanical systems, undated; Bazari, Z.
  7. WG3 N1043 - ESTEP AP 216 test case definitions, STEP Part 216, Application protocol: Ship moulded forms, undated; Ted Briggs, Juan Mendez, Blair Downie
  8. WG3 N1042 - ISO/DIS 15926-2. EXPRESS Schema for Oil & Gas Part 2, Process Plant Life Cycle, 2001-04-02; Jan Sullivan
  9. WG3 N1041 - Issues log for ISO/DIS 15926-2, Oil & Gas Part 2, Process Plant Life Cycle, 2001-04-27; Jan Sullivan
  10. WG3 N1040 - Convener leader approval checklist for ISO/DIS 15926-2, Oil & Gas Part 2, Process Plant Life Cycle, undated; Radack, Gerald

    WG3 N-Docs 1030 - 1039 (0 entries 10 subfolders)

This folder contains:

  1. WG3 N1039 - Project leader approval checklist for ISO/DIS 15926-2, ed1, Oil & Gas, Part 2, Process plant life cycle, 2001-04-06; Sullivan, Jan
  2. WG3 N1038 - Internal Review Checklist for ISO/DIS 15926-2,ed1, Oil & Gas Part 2, Process plant life cycle, 2001-03-30; Fowler, Julian
  3. WG3 N1037 - ISO/DIS 15926-2, ed1, source document, Oil & Gas, Part 2: Process plant life cycle, undated; Sullivan, Jan
    This document is © ISO.
  4. WG3 N1036 - Convener approval checklist for ISO/DIS 10303-216, ed1, STEP Part 216, Application protocol: Ship moulded forms, 2001-09-30; Radack, Gerald
  5. WG3 N1035 - Project leader approval checklist for ISO/DIS 10303-216, ed1, STEP Part 216, Application protocol: Ship moulded forms, 2001-09-20; Slovensky, Len
  6. WG3 N1034 - Internal review checklist for ISO/DIS 10303-216, ed1, STEP Part 216, Application protocol: Ship moulded forms, 2001-09-14; Crusey, Jesse L.
  7. WG3 N1033 - AIM long form for ISO/DIS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2001-10-08; Grau, Matthias
  8. WG3 N1032 - Validation report for ISO/DIS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2001-09-15; Turner,Tim and Slovensky, Len
  9. WG3 N1031 - Report of Voting/Annex B ISO/ DIS 10303-216, STEP Part 216, Application protocol: Ship moulded forms, 2001-10-04; sec
  10. WG3 N1030 - ISO/DIS 10303-216 source document,STEP Part 216, Application protocol: Ship moulded forms, undated; Grau, Matthias
    This document is © ISO.

    WG3 N-Docs 1020 - 1029 (0 entries 10 subfolders)

This folder contains:

  1. WG3 N1029 - Project leader approval checklist for ISO/FDIS 10303-204, STEP Part 204, Application protocol: Mechanical design using boundary representation, undated; Ray Goult
  2. WG3 N1028 - Internal review checklist for ISO/FDIS 10303-204, STEP Part 204, Application protocol: Mechanical design using boundary representation, undated; Mike Pratt
  3. WG3 N1027 - AIM long form for ISO/FDIS 10303-204, STEP Part 204, Application protocol: Mechanical design using boundary representation, undated; Ray Goult
  4. WG3 N1026 - Issues log for ISO/FDIS 10303-204, STEP Part 204, Application protocol: Mechanical design using boundary representation, undated; Ray Goult
  5. WG3 N1025 - ISO/FDIS 10303-204 document,STEP Part 204, Application protocol: Mechanical design using boundary representation, undated; Ray Goult
    This document is © ISO.
  6. WG3 N1024 - CD ballot issues log for ISO 15926-1, Integration of life-cycle for oil and gas production facilities - Part 1: Overview and fundamental principles, 2001-01-31; Nils Sandsmark
  7. WG3 N1023 - Convener Approval Checklist - ISO/DIS 15926-1, Integration of life-cycle for oil and gas production facilities - Part 1: Overview and fundamental principles, 2001-07-12; Gerald Radack
  8. WG3 N1022 - Project Leader Approval Checklist for ISO/DIS 15926-1, Integration of life-cycle for oil and gas production facilities - Part 1: Overview and fundamental principles, 2001-05-01; Nils Sandsmark
  9. WG3 N1021 - Internal Review Checklist for ISO/DIS 15926-1, Integration of life-cycle for oil and gas production facilities - Part 1: Overview and fundamental, 2001-03-06; Julian Fowler
  10. WG3 N1020 - ISO/DIS 15926-1, Integration of life-cycle data for process plants including oil and gas production facilities - Part 1: Overview and fundamental principles, 2001-08-08; Sandsmark, Nils
    This document is © ISO. This document supersedes: ISO TC184/SC4/WG3 N837.

    WG3 N-Docs 1010 - 1019 (0 entries 10 subfolders)

This folder contains:

  1. WG3 N1019 - Minutes of the ISO TC184/SC4/WG3 Meeting, San Francisco, California, USA, 2001-06-11 to 2001-06-14 2001-06-15; Radack, Gerald
  2. WG3 N1018 - SC4 framework status report undated; Ishikawa, Yoshiaki
  3. WG3 N1017 - DISC II: Common Ship Database undated; Haenisch, Jochen
  4. WG3 N1016 - Update to ISO/WD 10303-234, STEP Part 234, Application protocol: Ship operational logs, records, and messages undated; Haenisch, Jochen
  5. WG3 N1015 - ISO/CD 10303-226, STEP Part 226, Application protocol: Ship mechanical systems undated; originator unidentified
  6. WG3 N1014 - ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangement, 2001-04-27; Peter Lazo
  7. WG3 N1013 - Convener Approval Checklist for ISO/CD 10303-332, STEP Part 332, Abstract test suite: Technical data packaging core information and exchange, 2001-04-18; Gerald Radack
  8. WG3 N1012 - Project Leader Approval Checklist ISO/CD 10303-332 ed1, STEP Part 332, Abstract test suite: Technical data packaging core information and exchange, 2001-04-20; Jim Clark
  9. WG3 N1011 - Internal Review Checklist for ISO/CD 10303-332 ed1, STEP Part 332, Abstract test suite: Technical data packaging core information and exchange, 2001-05-03; Jesse L. Crusey
  10. WG3 N1010 - ISO/CD TS 10303-332, STEP Part 332, Abstract test suite: Technical data packaging core information and exchange 2001-04-27; Jim Clark

    WG3 N-Docs 1000 - 1009 (0 entries 9 subfolders)

This folder contains:

  1. WG3 N1009 - AP215 Validation report for ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangements, 2001-04-17; Lazo, Peter
  2. WG3 N1008 - Issue Log for ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangements, 2001-04-17 Lazo, Peter
  3. WG3 N1007 - AIM long form for ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangements undated; originator unidentified
  4. WG3 N1006 - ISO/CD 10303-215 source document, STEP Part 215, Application protocol: Ship arrangements, 2001-04-16; Lazo, Peter
    This document supersedes WG3N821.
  5. WG3 N1005 - Convener approval checklist for ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangements, 2001-04-23; Radack, Gerald
  6. WG3 N1004 - Project leader approval checklist for ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangements, 2001-04-17; Lazo, Peter
  7. WG3 N1003 - Internal review checklist for ISO/CD 10303-215, STEP Part 215, Application protocol: Ship arrangements, 2001-04-13; Crusey, Jesse L.
  8. WG3 N1002 - ISO/CD TS 10303-332, STEP Part 332, Abstract test suite: Technical data packaging core information and exchange, 2001-02-27; Clark, Jim
  9. WG3 N1001 - Minutes of T22, Building and Construction, Funchal, Portugal undated; Haas, Wolfgang
  10. WG3 N1000 - Reserved

SC4 Online Logo Notices Powered By DCNICN
Copyright © 2001 -2010  LAMP/IDE Virtual Enterprise.
Last Modified: 09/02/2010