SC4 Public > SC4 Open > SC4 and Working Groups > WG3 > N-DOCS > 1-999

ISO TC184/SC4 SC4 Logo
TC184/SC4 Industrial Data SC4 Online Logo

WG3 N-DOCS


NOTE: You are using a browser which may require you to refresh your display occasionally. See the Help section for details on known issues on this subject.

Help/Instructions    Type Legend

Turn Off Folder Description

Search THIS Repository  

Return to Top Level N-Docs

Data Current As Of: 2008-04-28 10:47:41 EST

Total Number Of Folders: 232   Total Number Of Folder Entries: 348

  Sort ALL Folders  
  Sort Top Level Folders  
    WG3 N-Docs 990 - 999 (0 entries 4 subfolders)
This folder contains:
  1. WG3 N999 - AIM EXPRESS short form for ISO/IS 10303-224 ed2, STEP Part 224, STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features, 2000-12-01; Slovensky, Len
  2. WG3 N998 -
  3. WG3 N997 - Discussion paper. Introduction to ISO TC184/SC4/WG3 Forum on on the Use of Classification Structures 2001-02-21 Norman Swindells
  4. WG3 N996
  5. WG3 N995
  6. WG3 N994 - Presentation. ISO 15926 and Standardise Data Sheet 2000-10-18 Total Fina Elf representative.
  7. WG3 N993 - Minutes of ISO TC184/SC4/WG3 Meetings in Charleston,SC 2000-10-15 through 2000-10-18 2000-10-18 Gerald Radack
  8. WG3 N992
  9. WG3 N991
  10. WG3 N990
    WG3 N-Docs 980 - 989 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N989 - AIM EXPRESS long form for ISO/IS 10303-224 ed2, STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features: 2000-12-01; Slovensky, Len
  2. WG3 N988 - ISO/IS 10303-224.2 source document, STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features, 2000-12-01; Slovensky, Len
    This document is © ISO. SC4ONLINE user identifier and password are needed to access this document. This document supersedes ISO TC 184/SC4/WG3 N854.
  3. WG3 N987 - ISO Form 13, REPORT OF VOTING/ANNEX B ISO/DIS 10303-224 STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features 2000-11-30; SC4Sec
  4. WG3 N986 - Convener approval checklist for ISO/IS 10303-224 ed2, STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features, 2000-12-06; Radack, Gerald
  5. WG3 N985 - Project leader approval checklist for ISO/IS 10303-224 ed2, STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features, 2000-12-01; Slovensky, Len
  6. WG3 N984 - Internal review checklist for ISO/IS 10303-224 ed2, STEP Part 224, Application protocol: Mechanical product definition for process planning using machining features, 2000-11-30; Crusey, Jesse
  7. WG3 N983
  8. WG3 N982
  9. WG3 N981
  10. WG3 N980 - Minutes of the Workshop Part of: AP226 Interpretation Report 2000-11-16 Z.Bazari

    WG3 N-Docs 970 - 979 (0 entries 10 subfolders)

This folder contains:

  1. WG3 N979 - Minutes of the AP226 (T23) Interpretation Workshop No. 2 Part of: AP226 Interpretation Report, 2000-11-16; Z Bazari
  2. WG3 N978 - ISO TC 184/SC4 WG3 T23 (Ship Team) Meeting Minutes,Charleston, South Carolina, USA, 2000-10-20;l Uwe Langbecker and Jim Mays
  3. WG3 N977 - Meeting Minutes Charleston, South Carolina, USA ISO TC184/SC4/WG3 N977 WG3 T1 (with WG12 Shape Representation 2000-10-21; Ray Goult
  4. WG3 N976 - Discussion Paper: New Process Data Model based on AP213, 2000-10-16; Yasumasa Oku
  5. WG3 N975 - Discussion Paper:XML-based High Level NC data Modeling for Manufacturing Data Management, 2000-10-19; Yasumasa Oku
  6. WG3 N974 - Discussion Paper: Integrated Manufacturing Strategy 2000-10-16; Yasumasa Oku
  7. WG3 N973 - ISO/TR 10303-304, STEP Part 304, Abstract test suite: Mechanical design using boundary representation, 2000-10-31; Ray Goult
    This document is © ISO.
  8. WG3 N972 - EXPRESS AIM Long Form for ISO/IS 10303-0209, STEP Part 209, Application protocol: Composite and metallic structural analysis and related design, 2001-06-21; Hunten, Keith
  9. WG3 N971 - EXPRESS AIM Short Form for ISO/IS 10303-0209, STEP Part 209, Application protocol: Composite and metallic structural analysis and related design, 2001-06-21; Hunten, Keith
  10. WG3 N970 - EXPRESS ARM for ISO/IS 10303-0209, STEP Part 209, Application protocol: Composite and metallic structural analysis and related design, 2001-06-21; Hunten, Keith

    WG3 N-Docs 960 - 969 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N969
  2. WG3 N968 - Ballot comment resolutions for ISO/DIS 10303-0209, STEP Part 209, Application protocol: Composite and metallic structural analysis and related design, 2001-02-06; Hunten, Keith
  3. WG3 N967
  4. WG3 N966 - Project leader approval checklist for ISO/IS 10303-0209, STEP Part 209, Application protocol: Composite and metallic structural analysis and related design, 2001-06-01; Hunten, Keith
  5. WG3 N965 - Internal review checklist for ISO/IS 10303-0209, STEP Part 209, Application protocol: Composite and metallic structural analysis and related design, 2001-06-01; Hunten, Keith
  6. WG3 N964
  7. WG3 N963
  8. WG3 N962
  9. WG3 N961
  10. WG3 N960
    WG3 N-Docs 950 - 959 (0 entries 2 subfolders)

This folder contains:

  1. WG3 N959
  2. WG3 N958
  3. WG3 N957
  4. WG3 N956
  5. WG3 N955 - ISO/DIS 10303-232 STEP Application protocol: Technical data packaging core information and exchange © ISO 2000-09-26 Glen Ziolko
  6. WG3 N954
  7. WG3 N953
  8. WG3 N952 - ISO TC 184/SC4 Meeting Minutes Bordeaux, France ISO TC184/SC4/WG3 N952 WG12 Shape Representation (with WG3 T1) 2000-06-26 to 2000-06-30 2000-06-30 Ray Goult
  9. WG3 N951
  10. WG3 N950

    WG3 N-Docs 940 - 949 (0 entries 6 subfolders)

This folder contains:

  1. WG3 N949
  2. WG3 N948
  3. WG3 N947 -Discussion Paper for Machining Process Model (version -2) 2000-06-02 Yasumasa Oku
  4. WG3 N946
  5. WG3 N945 - Proposal for NWI (Oil & Gas) Integration of life-cycle data for oil and gas production facilities Part 5: Procedures for registration and maintenance of reference data 2000-05-31 Originator unidentified
  6. WG3 N944 -Change Management Project Review Questionnaire for: Procedure standard, Technical standard, and initial content for a Reference data library for the oil & gas industry 2000-06-19, Julian Fowler
  7. WG3 N943 - Proposed New Work Item Summary Sheet ISO 15926 "Integration of life-cycle data for oil and gas production facilities"
    Part 4 Reference data ("Initial register content")
    Part 5 Procedures for registration and maintenance of reference data ("Procedure standard")
    Part 6 Scope and methodology for developing additional reference data ("Technical standard")     2000-06-19 Norwegian Technology Standards Institution
  8. WG3 N942
  9. WG3 N941 - New Work Item Proposal ISO/NP 15926-6:2000(E): Oil & Gas: Reference data library for the process industries "Part 6: Scope and methodology for developing additional reference data" 2000-05-30 Originator unidentified
  10. WG3 N940 - New Work Item Proposal ISO/NP 15926-4:2000(E) Oil & Gas: Reference data library for the process industries "Part 4: Initial reference data" 2000-05-29, Originator unidentified

    WG3 N-Docs 930 - 939 (0 entries 6 subfolders)

This folder contains:

  1. WG3 N939
  2. WG3 N938 - ISO/WD 10303-0226 source document, STEP Part 226, Application protocol: Ship mechanical systems, 2000-06-20; Bazari, Z
    This document supersedes ISO TC 184/SC4/WG3 N864.
  3. WG3 N937 - AIM EXPRESS short form for ISO/IS 10303-227:2000 STEP Application protocol: Plant spatial configuration, 2000-08-01; Mark Palmer
  4. WG3 N936
  5. WG3 N935
  6. WG3 N934
  7. WG3 N933 - ISO/WD Validation Report on ISO/IS 10303-214 STEP Application protocol: Core data for automotive mechanical design processes, 2000-07-19; Jürgen Mohrmann
  8. WG3 N932 - Issue Log on ISO/DIS 10303-214, STEP Application protocol: Core data for automotive mechanical design processes, 2000-05-24; Jürgen Mohrmann
  9. WG3 N931 - ISO/FDIS 10303-214, STEP Application protocol Core data for automotive mechanical design processes, 2000-07-13; Jürgen Mohrmann
    This document is © ISO. This document supersedes ISO TC 184/SC4/ N WG3 765.
  10. WG3 N930 - Project Leader Approval Checklist for ISO/FDIS 10303-214, STEP Application protocol Core data for automotive mechanical design processes, 2000-05-25; Jürgen Mohrmann

    WG3 N-Docs 920 - 929 (0 entries 4 subfolders)

This folder contains:

  1. WG3 N929 - Internal Review Checklist for ISO/FDIS 10303-215 STEP Application protocol: Ship arrangement 2000-06-07 Ullrich Pfeifer
  2. WG3 N928
  3. WG3 N927
  4. WG3 N926
  5. WG3 N925
  6. WG3 N924 - WG3 exploder transition plan 2000-05-05 Gerry Radack
  7. WG3 N923 -Sample AP203 STEP Model for ISO 10303-203 amendment 1, STEP Application protocol: Configuration controlled design 2000-05-04 Larry McKee
  8. WG3 N922 - List of Terms and Short Names, undated, Originator unidentified
  9. WG3 N921
  10. WG3 N920

    WG3 N-Docs 910 - 919 (0 entries 5 subfolders)

This foder contains:

  1. WG3 N919
  2. WG3 N918
  3. WG3 N917
  4. WG3 N916 - AIM long form for ISO 10303-203 amendment 1 STEP Application protocol: Configuration controlled design 2000-05-04 Larry McKee
  5. WG3 N915 - AIM short form for ISO 10303-203 amendment 1 STEP Application protocol: Configuration controlled design (SCHEMA config_control_design;) 2000-05-04 Larry McKee
  6. WG3 N914 - STEP Part 203: Application Protocol: Configuration controlled 3D designs of mechanical Parts and assemblies AMENDMENT 1 © ISO 2000 2000-05-04 ISO
  7. WG3 N913 - EXPRESS listing of STEP Part 204 DIS, STEP Application protocol: Mechanical design using boundary representation 2000-02-09 Ray Goult
  8. WG3 N912
  9. WG3 N911 - Minutes from the ISO 10303 STEP Meeting Melbourne, Australia 2000-02-14/18 ISO TC 184/SC4/WG3/T23 (SHIP TEAM) 2000-02-18 Uwe Langbecker, Jim Mays
  10. WG3 N910

    WG3 N-Docs 900 - 909 (0 entries 8 subfolders)

This folder contains:

  1. WG3 N909
  2. WG3 N908
  3. WG3 N907 - Convener Approval Checklist for Standard 10303 Part 204 Stage DIS, STEP Application protocol: Mechanical design using boundary representation 2000-04-18 Gerald Radack
  4. WG3 N906 -AP227 Issues Log STEP Application protocol: Plant spatial configuration 1998-06-12, Originator unidentified
  5. WG3 N905 - Convener Approval Checklist for ISO/IS 10303-227, STEP Application protocol: Plant spatial configuration 2000-08-25 Gerald Radack
  6. WG3 N904 - AIM EXPRESS long form for ISO/IS 10303-227:2000 STEP Application protocol: Plant spatial configuration 2000-08-01 Mark Palmer
  7. WG3 N903 - Internal Review Checklist for Standard ISO 10303 Part 227 Stage IS STEP Application protocol: Plant spatial configuration 2000-08-22 Mark Palmer
  8. WG3 N902 - Project Leader Approval Checklist Standard 10303 Part 227 Stage IS STEP Application protocol: Plant spatial configuration 2000-08-22 Mark Palmer
  9. WG3 N901 - Report of Voting/Annex B for ISO/DIS 10303-227 STEP Application protocol: Plant spatial configuration 2000-04-04 SC4 Secretariat
  10. WG3 N900 - AP226 PLIB-related Issue Log STEP Application protocol: Ship mechanical systems 2000-04-20 Dr Z Bazari

    WG3 N-Docs 890 - 899 (0 entries 6 subfolders)

This folder contains:

  1. WG3 N899
  2. WG3 N898 - Minutes of WG3/T22 Building & Construction, ISO/TC184/SC4 Meeting Melbourne 2000-02-14/19 and T22 Team Presentations 2000-02-19 Wolfgang Haas
  3. WG3 N897 - Discussion Paper. AP 203- the Next (and Future) Generation(s) 2000-02-dd Larry McKee
  4. WG3 N896 - Minutes of WG3 T19 'Mechanical Products at ISO/TC184/SC4 Meeting Melbourne 2000-02-14/19 2000-02-18 Juergen Mohrmann
  5. WG3 N895
  6. WG3 N894
  7. WG3 N893 -
  8. WG3 N892 - WG3 Plenaries and Team Leaders Meeting Minutes at Melbourne, Victoria, Australia 2000-02-17 Gerald Radack
  9. WG3 N891 - Discussion Paper. PLCS Liaison Roles 2000-02-17 John Dunford
  10. WG3 N890 - Presentation: Industry Need to Exchange "Data Linked Schematics" /"Functional Schematics" (aka, Intelligent Schematics) 2000-02-16, Mark Palmer

    WG3 N-Docs 880 - 889 (0 entries 5 subfolders)

This folder contains:

  1. WG3 N889 - WG12 Shape Representation (with WG3 T1) Meeting Minutes at ISO TC 184/SC4 Meeting Minutes Melbourne, Australia 2000-02-18 Ray Goult
  2. WG3 N888 - Status Report. WG 10 and WG 3 Closing Plenaries: SC4 Framework 2000-02-18 Y. Ishikawa and C. Vaughan
  3. WG3 N887 -
  4. WG3 N886
  5. WG3 N885
  6. WG3 N884
  7. WG3 N883 - ISO/CD 10303-218, STEP Application protocol: Ship Structures AIM long form, EXPRESS SCHEMA ship_structures_schema; undated, Originator unidentified
  8. WG3 N882 - AP218 Issue Log STEP Application protocol: Ship structures undated Originator unidentified
  9. WG3 N881 - Validation report for ISO/CD 10303-218, Ship Structures 2001-04-09 Len Slovensky
  10. WG3 N880 - Convener Approval Checklist for ISO/CD 10303-218 Ed1, STEP Application protocol: Ship structures 2001-04-03 Gerald Radack

    WG3 N-Docs 870 - 879 (0 entries 4 subfolders)

This folder contains:

  1. WG3 N879 - Project Leader Approval Checklist for ISO/CD 10303-218 ed1, STEP Application protocol: Ship structures, 2001-03-23; Slovensky, Len
  2. WG3 N878 - Internal Review Checklist for ISO/CD 10303-218 Ed1, STEP Application protocol: Ship structures, 2001-03-22; Crusey, Jesse L
  3. WG3 N877 - ISO/CD 10303-218, STEP Application protocol: Ship structures, 2001-03-23; Grau, Matthias
    This document is superseded by TC184/SC4 WG3N1080.
  4. WG3 N876 -
  5. WG3 N875 -
  6. WG3 N874 -
  7. WG3 N873 -
  8. WG3 N872 -
  9. WG3 N871 -
  10. WG3 N870 - Discussion Paper: Need of Machining Process Data Model 2000-02-14; Oku, Yasumasa

    WG3 N-Docs 860 - 869 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N869 -
  2. WG3 N868 - Convener approval checklist for ISO/DIS 10303-224 ed2, STEP Part 223, Application protocol: Mechanical product definition for process plans using machining features, 2004-03-08; Radack, Gerald
  3. WG3 N867 - Project leader approval checklist for ISO/DIS 10303-224 ed2, STEP Part 223, Application protocol: Mechanical product definition for process plans using machining features, 2004-02-23; Slovensky, Len
  4. WG3 N866 - Internal review checklist for ISO/DIS 10303-224 ed2, STEP Part 223, Application protocol: Mechanical product definition for process plans using machining features, 2004-02-03; Crusey, Jesse
  5. WG3 N865 - Validation report for ISO/DIS 10303-224 ed2, STEP Part 223, Application protocol: Mechanical product definition for process plans using machining features, 2004-02-23; Slovensky, Len
  6. WG3 N864 - ISO/WD 10303-226 STEP Part 226, Application Protocol: Ship Mechanical Systems, 2000-02-10; Bazari, Z
  7. WG3 N863 -
  8. WG3 N862 -
  9. WG3 N861 - Project Leader Approval Checklist for ISO/DIS 10303-204, STEP Application protocol, Mechanical design using boundary representation, 2000-02-08; Goult, Ray
  10. WG3 N860 - Internal Review Checklist for ISO/DIS 10303-204 STEP Application protocol: Mechanical design using boundary representation 2000-02-07 Jon Owen

    WG3 N-Docs 850 - 859 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N859 - Issue Log for ISO/DIS 10303-204, STEP Application protocol: Mechanical design using boundary representation 2000-02-10, Originator unidentified
  2. WG3 N858 - AP validation report for STEP Part 204, STEP Application protocol: Mechanical design using boundary representation undated, Originator unidentified
  3. WG3 N857 -
  4. WG3 N856 -
  5. WG3 N855 -
  6. WG3 N854 - ISO/DIS 10303-224 ed2 source document, STEP Part 224, Application protocol: Mechanical product definition for process plans using machining features, 2000-06-05; Slovensky, Len
    This document is © ISO. SC4ONLINE user identifier and password are needed to access this document.
  7. WG3 N853 - Issue Log for ISO/DTS 10303-314, STEP Abstract test suite: Core data for automotive mechanical design processes undated, Dr. Manfred Fischer
  8. WG3 N852 -Convener Approval Checklist for SC4 ISO/DTS 10303-314, STEP Abstract test suite: Core data for automotive mechanical design processes 1999-12-15 Gerald Radack
  9. WG3 N851 - Project Leader Approval Checklist for SC4: for ISO/DTS 10303-314 STEP Abstract test suite: Core data for automotive mechanical design processes 1999-11-28 Manfred Fischer
  10. WG3 N850 - Internal Review Checklist for ISO/DTS 10303-314 STEP Abstract test suite: Core data for automotive mechanical design processes 1999-11-22 Christian Donges
    WG3 N-Docs 840 - 849 (0 entries 9 subfolders)
his folder contains:
  1. WG3 N849 - ISO TC184/SC4/WG3/T4 Materials Meeting Summary, New Orleans, LA 1999-11-11 Anna Moreno
  2. WG3 N848 - ISO TC 184/SC4/WG3/T23 Ships Meeting Summary 1999-11-12 Uwe Langbecker and Jim Mays
  3. WG3 N847 - ISO TC 184/SC4/WG3/T20 Process Plant Meeting Summary 1999-11-09 Mark Palmer
  4. WG3 N846 - WG3/T19 "Mechanical Products" AP 232 Project Meeting Minutes 1999-11-11 Glen Ziolko
  5. WG3 N845 -
  6. WG3 N844 - WG3 T1 Shape Representation and WG12 Shape Representation Team Meeting Minutes 1999-11-12 Ray Goult
  7. WG3 N843 - Presentation to WG3 Plenary Session on STEP/SC4 Industrial Data Framework 1999-11-11 Chris Vaughan and Yoshiaki Ishikawa
  8. WG3 N842 - Convener approval checklist for ISO 15926-002, Oil & Gas, Part 2, Data Model 1999-11-17 Gerald Radack
  9. WG3 N841 - Convener approval checklist for ISO 15926-001, Oil & Gas, Part 1, Overview and fundamental principles 1999-11-16 Gerald Radack
  10. WG3 N840 - Proposed "Technical Standard" To Support A Common Reference Data Library for the Process Industries 1999-11-17 EPISTLE
    WG3 N-Docs 830 - 839 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N839 -
  2. WG3 N838 - ISO/CD 15926-2:1999(E), Integration of life-cycle data for oil and gas production facilities, Part 2: Data model 1999-11-12; Jan Sullivan
  3. WG3 N837 - ISO/CD 15926-1:1999(E) Integration of life-cycle data for oil and gas production facilities "Part 1: Overview and fundamental principles" 1999-11-12; Nils Sandsmark
  4. WG3 N836 - WG3 Presentation to SC4 Closing Plenary 1999-11-12; Gerald Radack
  5. WG3 N835 - Implications of making short forms available electronically Gerald Radack, WG3 Convener; Greg Paul, WG12 Convener
  6. WG3 N834 -
  7. WG3 N833 - Making long forms available electronically undated; Martin Philipp
  8. WG3 N832 - STEP Modularization Overview: Where are we now? 1999-11-08; David Price
  9. WG3 N831 - Proposal of Machining Process Model 1999-11-08; Yasumasa Oku
  10. WG3 N830 - Proposal of Integrated AAM for Mechanical Design Manufacturing (2) 1999-11-08; Yasumasa Oku
    WG3 N-Docs 820 - 829 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N829 - AP226- PLIB Status 1999-11-09, Gerald Radack
  2. WG3 N828 -
  3. WG3 N827 -
  4. WG3 N826 -
  5. WG3 N825 -
  6. WG3 N824 -
  7. WG3 N823 -
  8. WG3 N822 - ISO/DTS 10303-314: STEP Abstract test suite: Core data for automotive mechanical design process 1999-12-30 Manfred Fischer
  9. WG3 N821 - ISO/WD 10303-215:STEP Application Protocol: Ship arrangements 1999-11-24 Peter Lazo
  10. WG3 N820 -
    WG3 N-Docs 810 - 819 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N819 - Reviewers' Guide to ISO 15926, Integration of life-cycle data for oil and gas production facilities 1999-10-18; Fowler, Julian
  2. WG3 N818 -
  3. WG3 N817 -
  4. WG3 N816 - Convener Approval Checklist for SC4 for Standard ISO 10303 Part 25, Stage 3 STEP Implementation method: FORTRAN language binding to SDAI 1999-10-25; Gerald Radack
  5. WG3 N815 -
  6. WG3 N814 -
  7. WG3 N813 -
  8. WG3 N812 - AP226 PLIB-related Issue Log 1999-10-20; Dr Z Bazari
  9. WG3 N811 -
  10. WG3 N810 -
    WG3 N-Docs 800 - 809 (0 entries 8 subfolders)
This folder contains:
  1. WG3 N809 - ISO/DTS 10303-325: STEP Abstract test suite: Building elements using explicit shape representation 1999-09-09; Wolfgang Haas
  2. WG3 N808 - Issues log for ISO/CD 15926-2:1999(E): Integration of life-cycle data for oil and gas production facilities - Issues log for Part 2: Data model 1999-09-14; Jan Sullivan
  3. WG3 N807 - Project Leader Approval Checklist for ISO/CD 15926-2: Integration of life-cycle data for oil and gas production facilities: Part 2: Data model 1999-09-15; Jan Sullivan
  4. WG3 N806 - Internal Review Checklist for ISO/CD 15926-2 Integration of life-cycle data for oil and gas production facilities Part 2: Data model 1999-09-15; Jochen Haenisch
  5. WG3 N805 - Issues log for ISO/CD 15926-1:1999(E) Issues log for Integration of life-cycle data for oil and gas production facilities: Part 1: Overview and fundamental principles 1999-09-03; Nils Sandsmark
  6. WG3 N804 - Project Leader Approval Checklist for ISO/CD 15926-1, Integration of life-cycle data for oil and gas production facilities Part 1: Overview and fundamental principles 1999-10-04; Nils Sandsmark
  7. WG3 N803 - Internal Review Checklist ISO/CD 15926-1 Integration of life-cycle data for oil and gas production facilities Issues log for Part 1: Overview and fundamental principles 1999-09-03; Jochen Haenisch
  8. WG3 N802 - Reviewers' Guide to ISO 15926, Integration of life-cycle data for oil and gas production facilities 1999-09-05; originator unidentified
  9. WG3 N801 -
  10. WG3 N800 -
    WG3 N-Docs 790 - 799 (0 entries 4 subfolders)
This folder contains:
  1. WG3 N799 - ISO 10303-218, Pre-Committee Draft, STEP Application protocol: Ship structures 1999-09-30 Matthias Grau
  2. WG3 N798 -
  3. WG3 N797 -
  4. WG3 N796 -
  5. WG3 N795 -
  6. WG3 N794 - ISO/CD 15926-1:1999(E) Integration of life-cycle data for oil and gas production facilities Part 1: Overview and fundamental principles 1999-09-03 Nils Sandsmark
  7. WG3 N793 - ISO/WD 10303-226, STEP Part 226: Application Protocol: Ship Mechanical Systems 1999-09-30 Dr Z Bazari
  8. WG3 N792 -
  9. WG3 N791 -
  10. WG3 N790 - Brief introduction to the funStep data models 1999-06-10 Ricardo Gonçalves
    WG3 N-Docs 780 - 789 (0 entries 6 subfolders)
This folder contains:
  1. WG3 N789 -
  2. WG3 N788 - ISO/TS 10303-324 source document, STEP Part 324, Abstract test suite: Mechanical product definition for process planning using machining features, 1999-06-21; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3N751.
  3. WG3 N787 -
  4. WG3 N786 -
  5. WG3 N785 - ISO/NWI 10303-xxx, STEP Usage guide for ISO 10303-212 ship electrical systems 1999-04-30; Dr. Gerald Radack
  6. WG3 N784 - ISO/WD 10303-226, STEP Part 226: Application protocol: Ship mechanical systems 1999-04-30; Dr Z Bazari
  7. WG3 N783 - Minutes of the ISO TC184/SC4/WG3 Meeting San Francisco, California, USA 1999-01-25/28 1999-01-28; Gerald Radack(ed), Norman Swindells, Bruno Schilli.
  8. WG3 N782 - ISO/WD 15926-2 (E). Integration of life-cycle data for oil and gas production facilities, Part 2: Data model 1999-03-09; Nils Sandsmark
    This document supersedes ISO TC184/SC4 WG3N739.
  9. WG3 N781 - ISO/WD 15926-1 (E). Integration of life-cycle data for oil and gas production facilities, Part 1: Overview and fundamental principles 1999-03-09; Nils Sandsmark
    This document supersedes ISO TC184/SC4/ WG3N742.
  10. WG3 N780 -
    WG3 N-Docs 770 - 779 (0 entries 5 subfolders)
This folder contains:
  1. WG3 N779 - ISO/WD 10303-233, STEP Application protocol: Product data representation and exchange: System engineering data representation © ISO 1999-02-15 Sylvain Barbeau
  2. WG3 N778 - Product Life Cycle Support: Statement of Technical Requirements (STR), 3rd draft 1998-02-17 Originator unidentified
  3. WG3 N777 - High-Level Planning Model for Product Lifecycle Support 1998-03-01 William Burkett
  4. WG3 N776 -
  5. WG3 N775 - EXPRESS SCHEMA technical_data_packaging undated Originator unidentified
  6. WG3 N774 -
  7. WG3 N773 - Proposal of Integrated AAM for Mechanical Design and Manufacturing 1999-01-24 Yasumasa Oku
  8. WG3 N772 -
  9. WG3 N771 -
  10. WG3 N770 -
    WG3 N-Docs 760 - 769 (0 entries 7 subfolders)
This folder contains:
  1. WG3 N769 - ISO/WD 10303-226, AP226 Industry Review Report III (Issue Log) 1999-01-12 Dr Z Bazari
  2. WG3 N768 - AP 233 Data model Proposal: Systems Engineering Data Representation 1998-12-02 Erik Herzog & Sylvain Barbeau
  3. WG3 N767 -
  4. WG3 N766 -
  5. WG3 N765 - ISO/DIS 10303-214 source document STEP Application protocol: Core data for automotive mechanical design processes, 1998-10-28; Mohrmann, Juergen
    This document is © ISO. SC4ONLINE user identifier/password needed to access this document.
  6. WG3 N764 -
  7. WG3 N763 - Presentation on ISO 13584 Parts Library Part 26, Supplier Identification 1998-03-25 Gerald Radack
  8. WG3 N762 - Identification in ISO 15926: Oil & gas facilities lifecycle information 1998-06-08 Jan Sullivan
  9. WG3 N761 - Presentation on Globally Unique Identifiers (GUIDs) 1998-06-09 Bob Fisher at Open Technical Forum, Bad Aibling
  10. WG3 N760 - Presentation on Part Identification 1998-06-08 Jim Kindrick at Open Technical Forum, Bad Aibling
    WG3 N-Docs 750 - 759 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N759 - Presentation on: International Project Management to ISO TC184/SC4 Bad Aibling Meeting 1998-06-07 J.D. Lampron
  2. WG3 N758 - Presentation on: NATO Codification an International Standard? to ISO TC184/SC4 Bad Aibling Meeting 1998-06-07 J. D. Lampron
  3. WG3 N757 - Minutes of ISO/TC184/SC4/WG3 Open Technical Forum on Product Identification Bad Aibling, Germany 1998-06-09 and 1998-06-11 1998-09-25 Gerry Radack and John Dunford
  4. WG3 N756 -
  5. WG3 N755 -
  6. WG3 N754 -
  7. WG3 N753 -
  8. WG3 N752 -
  9. WG3 N751 -
  10. WG3 N750 -
    WG3 N-Docs 740 - 749 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N749 - Minutes of the STEP WG3 / T22 / N749, Building Construction Group Meeting in Bad Aibling 1998-06-08 to 1998-06-12 1998-07-10; M A Ward
  2. WG3 N748 -
  3. WG3 N747 -
  4. WG3 N746 -
  5. WG3 N745 -
  6. WG3 N744 -
  7. WG3 N743 - ISO/WD 15926-5 (E) Integration of life-cycle data for oil and gas production facilities, Part 5: Conformance 1998-05-29; Jan Sullivan
  8. WG3 N742 - ISO/WD 15926-1 (E) Integration of life-cycle data for oil and gas production facilities, Part 1: Overview and fundamental principles 1998-05-07; Nils Sandsmark
    This document supersedes ISO TC184/SC4 WG3N721.
  9. WG3 N741 -
  10. WG3 N740 -
    WG3 N-Docs 730 - 739 (0 entries 4 subfolders)
This folder contains:
  1. WG3 N739 - ISO/WD 15926-2 Integration of life-cycle data for oil and gas production facilities, Part 2: Data model 1998-04-30 Jan Sullivan
  2. WG3 N738 - Minutes of the ISO TC184/SC4/WG3 Meeting Orlando, Florida, USA 1998-02-02/05 1998-03-27 Tim Wise
  3. WG3 N737 -
  4. WG3 N736 - Team Reports ISO TC184/SC4/WG3 Plenary Thursday, 1998-02-05 1998-02-05 Gerald Radack
  5. WG3 N735 -
  6. WG3 N734 -
  7. WG3 N733 - Minutes of the ISO TC184/SC4/WG3 Meeting Orlando, Florida, USA 1998-02-02/05 1998-02-05 Tim Wise
  8. WG3 N732 -
  9. WG3 N731 -
  10. WG3 N730 -
    WG3 N-Docs 720 - 729 (0 entries 5 subfolders)
This folder contains:
  1. WG3 N729 -
  2. WG3 N728 - ISO/WD 10303-223, STEP Application protocol: Exchange of design and manufacturing product information for cast parts 1998-01-30; Gerald M. Radack
    This document has been superseded by ISO TC184/SC4/WG3 N1918.
  3. WG3 N727 -
  4. WG3 N726 - ISO/WD 10303-223, STEP Application protocol: Exchange of design and manufacturing product information for cast parts 1998-01-22; Gerald M. Radack
  5. WG3 N725 -
  6. WG3 N724 -
  7. WG3 N723 - ISO/WD 15926-3 (E) Integration of life-cycle data for oil and gas production facilities, Part 3: Methodology for the development and maintenance of reference data libraries. 1998-05-29; Magne Valen-Sendstad
  8. WG3 N722 - Integration of life-cycle data for oil and gas production facilities, Part 2: Data model, first draft 1998-01-02; Nils Sandsmark
  9. WG3 N721 - ISO/WD 15926-1 (E) Integration of life-cycle data for oil and gas production facilities, Part 1: Overview and fundamental principles 1998-01-22; Nils Sandsmark
  10. WG3 N720 -
    WG3 N-Docs 710 - 719 (0 entries 5 subfolders)
This folder contains:
  1. WG3 N719 - ISO/FDIS 10303-0225, STEP Part 225, Application protocol: Building elements using explicit shape representation, 1998-01-16; Haas, Wolfgang
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG3 N710.
  2. WG3 N718 -
  3. WG3 N717 -
  4. WG3 N716 -
  5. WG3 N715 - ISO/CD 10303-107, STEP Integrated application resource: Engineering Analysis Core Model 1998-01-23 Rodney Dreisbach
  6. WG3 N714 -
  7. WG3 N713 - ISO/TR Implementation subsets of 10303-203: Application protocol: Configuration controlled design © ISO 1997-12-04 Allison Barnard Feeney
  8. WG3 N712 - WG3 Report to TC 184/SC4 Closing Plenary Florence, Italy 1997-10-24 Gerry Radack
  9. WG3 N711 - Minutes of the ISO TC184/SC4/WG3 Meeting Florence, Italy. Dates: Monday 1997-10-20, Thursday 1997-10-23 1997-10-23 Norman Swindells
  10. WG3 N710 -
    WG3 N-Docs 700 - 709 (0 entries 4 subfolders)
This folder contains:
  1. WG3 N709 -
  2. WG3 N708 -
  3. WG3 N707 - Summary sheet for a proposed SC4 New Work Item: Application protocol: Materials information for products 1998-02-09 Rodney Dreisbach and David Leal
  4. WG3 N706 -
  5. WG3 N705 - ISO 15926 Integration of life-cycle data for oil and gas production facilities: Responses to issues raised during the New Work Item Proposal ballot 1997-10-21 Julian Fowler
  6. WG3 N704 -
  7. WG3 N703 - ISO/WD 10303-226 AP226 Industry Review Report II 1998-01-13 Dr Z Bazari
  8. WG3 N702 -
  9. WG3 N701 - AP Development Guidelines for Shipbuilding 1997-11-21 Tim Turner
  10. WG3 N700 -
    WG3 N-Docs 600 - 609 (0 entries 3 subfolders)
This folder contains:
  1. WG3 N609
  2. WG3 N608
  3. WG3 N607
  4. WG3 N606
  5. WG3 N605
  6. WG3 N604 - WG3 REPORT to Closing Plenary Session, San Diego,CA 1997-06-06 Barbara Warthen, Gerry Radack
  7. WG3 N603 - Minutes of the WG3 Meeting, San Diego, CA 1997-06-06 Bill Gruttke
  8. WG3 N602 - Applying Metrics to AP Quality Assurance 1997-06-05 Tom Bluhm
  9. WG3 N601
  10. WG3 N600
    WG3 N-Docs 590 - 599 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N599
  2. WG3 N598
  3. WG3 N597
  4. WG3 N596
  5. WG3 N595 - ISO/FDIS 10303-0207, STEP Part 207, Application protocol: Sheet metal die planning and design, 1997-08-05; Ketkar, Prajakta
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG 3 N445.
  6. WG3 N594
  7. WG3 N593
  8. WG3 N592
  9. WG3 N591
  10. WG3 N590
    WG3 N-Docs 580 - 589 (0 entries 2 subfolders)
This folder contains:
  1. WG3 N589
  2. WG3 N588
  3. WG3 N587
  4. WG3 N586 - Minutes of the WG3 Plenary, Chester, UK 1997-03-02 Barbara Warthen,
  5. WG3 N585
  6. WG3 N584
  7. WG3 N583 WG3 Report to Closing Plenary Session, Chester,UK, 1997-03-07 Barbara Warthen, Gerry Radack
  8. WG3 N582
  9. WG3 N581
  10. WG3 N580
    WG3 N-Docs 570 - 579 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N579
  2. WG3 N578
  3. WG3 N577
  4. WG3 N576
  5. WG3 N575
  6. WG3 N574
  7. WG3 N573
  8. WG3 N572
  9. WG3 N571
  10. WG3 N570 - ISO/DIS 10303 Part 213,STEP Application protocol: Numerical Control (NC) process plans for machined parts 1995-09-22 Ashwini K. Sinha
    WG3 N-Docs 560 - 569 (0 entries 2 subfolders)
This folder contains:
  1. WG3 N569
  2. WG3 N568
  3. WG3 N567
  4. WG3 N566
  5. WG3 N565 - ISO/NWI 10303-213, STEP Application protocol: Numerical Control (NC) process plans for machined parts, 1997-01-30; Mitchell E. Gilbert
  6. WG3 N564
  7. WG3 N563
  8. WG3 N562
  9. WG3 N561
  10. WG3 N560 - ISO/FDIS 10303-47, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1996-10-18; Anderson , Bill
    This document is © ISO. This document supersedes ISO TC184/SC4 WG3N541.
    WG3 N-Docs 550 - 559 (0 entries 2 subfolders)
This folder contains:
  1. WG3 N559
  2. WG3 N558
  3. WG3 N557
  4. WG3 N556 - Metrics for Assessing AP Validation 1996-10-11 Gerald Radack, Juergen Mohrmann, Norman Swindells, Hans Teijgeler
  5. WG3 N555
  6. WG3 N554
  7. WG3 N553
  8. WG3 N552 - Metrics for Assessing AP Validation 1996-10-10 Juergen Mohrmann, Gerald Radack, Norman Swindells, Hans Teijgeler
  9. WG3 N551
  10. WG3 N550
    WG3 N-Docs 540 - 549 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N549 -
  2. WG3 N548 -
  3. WG3 N547 -
  4. WG3 N546 -
  5. WG3 N545 -
  6. WG3 N544 -
  7. WG3 N543 - ISO/FDIS 10303-45 source document, STEP Part 45, Integrated generic resource: Materials, 1996-08-01; Swindells, Robert J.
    This document is © ISO. This document supersedes ISO TC184/SC4/WG3 N512.
  8. WG3 N542 -
  9. WG3 N541 -
  10. WG3 N540 -
    WG3 N-Docs 530 - 539 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N539
  2. WG3 N538
  3. WG3 N537 - ISO/CD 10303-231 source document, STEP Part 231, Application protocol: Process engineering data, 1996-09-03; Gilbert, Mitch
  4. WG3 N536
  5. WG3 N535
  6. WG3 N534
  7. WG3 N533
  8. WG3 N532
  9. WG3 N531
  10. WG3 N530
    WG3 N-Docs 520 - 529 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N529
  2. WG3 N528 - ISO/WD 10303-230 source document, STEP Part 230, Application protocol: Buidling Structural Framework: Steelwork, 1996-07-02; Ward, Michael
  3. WG3 N527
  4. WG3 N526
  5. WG3 N525
  6. WG3 N524
  7. WG3 N523
  8. WG3 N522
  9. WG3 N521
  10. WG3 N520
    WG3 N-Docs 510 - 519 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N519 -
  2. WG3 N518 -
  3. WG3 N517 -
  4. WG3 N516 -
  5. WG3 N515 -
  6. WG3 N514 -
  7. WG3 N513 -
  8. WG3 N512 -
  9. WG3 N511 -
  10. WG3 N510 - ISO/DIS 10303-0225 source document, STEP Part 225, Application protocol: Building elements using explicit shape representation, 1996-07-12; Haas, Wolfgang
    This document is © ISO. This document supersedes SC4/WG3 N493.
    WG3 N-Docs 500 - 509 (0 entries 2 subfolders)
This folder contains:
  1. WG3 N509
  2. WG3 N508 - Proposed Extensions to ISO/WD 10303-42, STEP Part 42, Integrated generic resource: Geometric and topological representation CSG_ volumes and SEDS corrections, 1996-06-04 Ray Goult
  3. WG3 N507
  4. WG3 N506
  5. WG3 N505
  6. WG3 N504
  7. WG3 N503
  8. WG3 N502 - Requirements Analysis for an Explicit Constraints Schema for STEP 1996-05-10 M. J. Pratt
  9. WG3 N501
  10. WG3 N500
    WG3 N-Docs 480 - 489 (0 entries 2 subfolders)
This folder contains:
  1. WG3 N489
  2. WG3 N488
  3. WG3 N487
  4. WG3 N486 - ISO/WD 10303-230, STEP Application protocol: Building structural frame: Steelwork 1996-04-20 Michael A Ward
  5. WG3 N485 - Ballot issues and their solutions against ISO/DIS 10303-105, STEP Integrated application resource: Kinematics 1996-03-05 Arnold Ludwig
  6. WG3 N484
  7. WG3 N483
  8. WG3 N482
  9. WG3 N481
  10. WG3 N480
    WG3 N-Docs 450 - 459 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N459
  2. WG3 N458
  3. WG3 N457
  4. WG3 N456 - Alternate Proposal for ISO 10303-45, STEP Integrated generic resource: Materials - Property Category Schema, 1996-01-23 Robert J Swindells
  5. WG3 N455
  6. WG3 N454
  7. WG3 N453
  8. WG3 N452
  9. WG3 N451
  10. WG3 N450
    WG3 N-Docs 420 - 429 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N429
  2. WG3 N428
  3. WG3 N427
  4. WG3 N426
  5. WG3 N425
  6. WG3 N424 - ISO/CD 10303, Guide on STEPlib, Guide for the creation and maintenance of Standard Data for Process Plants v 1.8 1997-07-10 Andries van Renssen
  7. WG3 N423
  8. WG3 N422
  9. WG3 N421
  10. WG3 N420
    WG3 N-Docs 410 - 419 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N419
  2. WG3 N418
  3. WG3 N417 - Validation Report for ISO/WD 10303-218, STEP Application protocol: Ship structures 1995-06-23 Yuanxie Janke-Zhao
  4. WG3 N416
  5. WG3 N415
  6. WG3 N414
  7. WG3 N413
  8. WG3 N412
  9. WG3 N411
  10. WG3 N410
    WG3 N-Docs 380 - 389 (0 entries 1 subfolder)
This folder contains:
  1. WG3 N389
  2. WG3 N388
  3. WG3 N387
  4. WG3 N386
  5. WG3 N385
  6. WG3 N384
  7. WG3 N383 - White Paper. A Proposed Architecture for Developing a Suite of Application Protocols for STEP on Near Net Shape Processes for Producing Discrete Parts 1992-05-18 Hubert D. Callihan, Richard Henry, Constantine D. Orogo, and Howard A. Kuhn
  8. WG3 N382
  9. WG3 N381
  10. WG3 N380