SC4 Public > SC4 Open > SC4 and Working Groups > WG12 > N-DOCS > 1-499

ISO TC184/SC4 SC4 Logo
TC184/SC4 Industrial Data SC4 Online Logo

WG12 N-DOCS


NOTE: You are using a browser which may require you to refresh your display occasionally. See the Help section for details on known issues on this subject.

Help/Instructions    Type Legend

Turn Off Folder Description

Search THIS Repository  

Return to Top Level N-Docs

Data Current As Of: 2008-04-28 15:31:45 EST

Total Number Of Folders: 448   Total Number Of Folder Entries: 1006

  Sort ALL Folders  
  Sort Top Level Folders  
    WG12 N-Docs 490 - 499 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N499 - ISO 10303-43:1994 TC2, STEP Part 43, Integrated generic resource: Representation structures 1999-12-28; Fowler, Julian
  2. WG12 N498 - Convener Approval Checklist for ISO/DIS 10303-518, STEP Part 518, Application interpreted construct, Mechanical design shaded representation 2000-01-17; Paul, Greg
  3. WG12 N497 - Project Leader Approval Checklist ISO/DIS 10303-518, STEP Part 518, Application interpreted construct, Mechanical design shaded representation 2000-01-11; Haenisch, Jochen
  4. WG12 N496 - Internal Review Checklist for ISO/DIS 10303-518, STEP Part 518, Application interpreted construct, Mechanical design shaded representation 1999-12-21; Goult, Ray
  5. WG12 N495 - ISO/DIS 10303-518 CD Ballot Comments Resolutions, STEP Parta 518, Application interpreted construct, Mechanical design shaded representation 1999-12-21; Haenisch, Jochen
  6. WG12 N494 - ISO/DIS 10303-518 Short Names, STEP Part 518, Application interpreted construct, Mechanical design shaded representation 2000-01-10; Haenisch, Jochen
  7. WG12 N493 - Convener Approval Checklist for ISO 10303-506, STEP Part 506, Application interpreted construct: Draughting elements 2000-01-05; Paul, Greg
  8. WG12 N492 - Project Leader Approval Checklist for ISO 10303-506, STEP Part 506, Application interpreted construct: Draughting elements 2000-01-03; Maier, Marcus
  9. WG12 N491 - Internal Review Checklist for ISO 10303-506, STEP Part 506, Application interpreted construct: Draughting elements 2000-01-03; Maier, Marcus
  10. WG12 N490 - ISO 10303-506 IS Ballot Comments Resolutions , STEP Part 506, Application interpreted construct: Draughting elements 2000-01-03; Maier, Marcus
    WG12 N-Docs 480 - 489 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N489 - ISO/IS 10303-506 Short Names, STEP Part 506, Application interpreted construct: Draughting elements, 2000-01-03; Maier, Markus
  2. WG12 N488 - ISO/IS 10303-506 EXPRESS, STEP Part 506, Application interpreted construct: Draughting elements, 2000-01-03; Maier, Markus
  3. WG12 N487 - ISO/IS 10303-506 Document, STEP Part 506, Application interpreted construct: Draughting elements, 2000-01-03; Maier, Markus
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N255.
  4. WG12 N486 - Convener Approval Checklist for ISO/IS 10303-505, STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-23; Paul, Greg
  5. WG12 N485 - Project Leader Checklist for ISO/IS 10303-505, STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-21; Maier, Markus
  6. WG12 N484 - Internal Review Checklist for ISO/IS 10303-505 STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-21; Maier, Markus
  7. WG12 N483 - Ballot Comments Resolutions for ISO/IS 10303-505 STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-21; Maier, Markus
  8. WG12 N482 - ISO/IS 10303-505 Short Names, STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-21; Maier, Markus
  9. WG12 N481 - ISO/IS 10303-505 EXPRESS, STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-21; Maier, Markus
  10. WG12 N480 - ISO/IS 10303-505 Document, STEP Part 505, Application interpreted construct: Drawing structure and administration, 1999-12-21; Maier, Markus
    This document is © ISO. This document supersedes document WG12N254.
    WG12 N-Docs 470 - 479 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N479 - Ballot issues resolution for ISO/IS 10303-513, STEP Part 513, Application interpreted construct: Elementary boundary representation, 1999-12-15; Goult, Ray
  2. WG12 N478 - Project Leader Approval Checklist ISO/IS 10303-513, STEP Part 513, Application interpreted construct: Elementary boundary representation, 1999-12-15; Goult, Ray
  3. WG12 N477 - Internal Review Check List for ISO/IS 10303-513, STEP Part 513, Application interpreted construct: Elementary boundary representation, 1999-12-07; Goult, Ray
  4. WG12 N476 - ISO/IS 10303-513 EXPRESS, STEP Part 513, Application interpreted construct: Elementary boundary representation, 1999-12-24; Goult, Ray
  5. WG12 N475 - ISO/IS 10303-513 Document, STEP Part 513, Application interpreted construct: Elementary boundary representation, 1999-12-24; Goult, Ray
    This document is © ISO. This document supersedes WG12N167.
  6. WG12 N474 - Minutes of WG12 Parametrics Meeting in New Orleans, LA, November, 1999 1999-11-12; Pratt, Mike
  7. WG12 N473 - Convener Approval Checklist ISO 10303-513, STEP Part 513, Application interpreted construct: Elementary boundary representation 2000-01-06; Paul, Greg
  8. WG12 N472 - WG12 Shape Representation Meeting Minutes from New Orleans, LA, November, 1999, 1999-11-12; Goult, Ray
  9. WG12 N471 - DRAFT ISO 10303-43 TC2, STEP Part 43, Integrated generic resource: Representation structures, 1999-12-01; Fowler, Julian
  10. WG12 N470 - SC4/WG12 Part Review Procedure, 1999-11-27; Paul, Greg
    WG12 N-Docs 460 - 469 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N469 - Convener Approval Checklist, ISO/IS 10303-44e2, STEP Part 44, Integrated generic resource: Product structure configuration, 2000-03-29; Paul, Greg
  2. WG12 N468 - Project Leader Approval Checklist ISO/IS 10303-44e2, STEP Part 44, Integrated generic resource: Product structure configuration, 2000-01-25; Gilbert, Mitch
  3. WG12 N467 - Internal Review Checklist for ISO/IS 10303-44e2, STEP Part 44, Integrated generic resource: Product structure configuration, 2000-01-19; Gilbert, Mitch
  4. WG12 N466 - ISO 10303-44e2 DIS Ballot Comments Resolutions, STEP Part 44, Integrated generic resource: Product structure configuration, 2000-01-05; Gilbert, Mitch
  5. WG12 N465 - ISO 10303-44e2 Short Names, STEP Part 44, Integrated generic resource: Product structure configuration, 1999-12-14; Gilbert, Mitch
  6. WG12 N464 - ISO 10303-44e2 EXPRESS, STEP Part 44, Integrated generic resource: Product structure configuration, 1999-12-14; Gilbert, Mitch
  7. WG12 N463 - ISO 10303-44e2 Document, STEP Part 44, Integrated generic resource: Product structure configuration, 1999-12-14; Gilbert, Mitch
    This document is © ISO. This document supersedes WG12N279.
  8. WG12 N462 - Convener Approval Checklist for ISO/IS 10303-43e2, STEP Part 43, Integrated generic resource: Representation structures, 2000-04-05; Paul, Greg
  9. WG12 N461 - Project Leader Approval Checklist for ISO/IS 10303-43e2, STEP Part 43, Integrated generic resource: Representation structures, 1999-12-29; Fowler, Julian
  10. WG12 N460 - Internal Review Checklist for ISO/IS 10303-43e2, STEP Part 43, Integrated generic resource: Representation structures, 1999-12-29; Fowler, Julian
    WG12 N-Docs 450 - 459 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N459 - ISO 10303-43e2 DIS Ballot Comments Resolutions, STEP Part 43, Integrated generic resource: Representation structures, 1999-12-13; Fowler, Julian
  2. WG12 N458 - ISO/DIS 10303-43e2 EXPRESS, STEP Part 43, Integrated generic resource: Representation structures, 1999-12-13; Fowler, Julian
  3. WG12 N457 - ISO/DIS 10303-43e2 Document, STEP Part 43, Integrated generic resource: Representation structures, 1999-12-13; Fowler, Julian
    This document is © ISO. This document supersedes WG12N294.
  4. WG12 N456 - Convener Approval Checklist for ISO/FDIS 10303-41e2, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-07-06; Paul, Greg
  5. WG12 N455 - Project Leader Approval Checklist for ISO/FDIS 10303-41e2, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-06-28; Huau, Pascal
  6. WG12 N454 - Internal Review Checklist for ISO/FDIS 10303-41e2, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-06-28; Huau, Pascal
  7. WG12 N453 - ISO 10303-41e2 DIS Ballot Comments Resolutions, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-06-05; Huau, Pascal
  8. WG12 N452 - ISO/FDIS 10303-41e2 Short Names, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-01-27; Huau, Pascal
  9. WG12 N451 - ISO/FDIS 10303-41e2 EXPRESS, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-01-21; Huau, Pascal
  10. WG12 N450 - ISO/FDIS 10303-41e2 Document, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 2000-01-27; Huau, Pascal
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG 12 N265.
    WG12 N-Docs 440 - 449 (0 entries 9 subfolders)
This folder contains:
  1. WG12 N449 - New Orleans Presentation of ISO 10303-50 Status, Progress, and Changes, 1999-11-03; Kraushar, Phil
  2. WG12 N448 - JNC Proposal for STEP Assembly Model of Products, 1999-11-09; Sugimur, Nobuhiro
  3. WG12 N447 - WG12 Support of SC4 Tactics and Strategies by Project (slides), 1999-11-07; Paul, Greg
  4. WG12 N446 - Final WG12 Agenda for New Orleans Meeting, 1999-11-07; Paul, Greg
  5. WG12 N445 - WG12 Closing Plenary Slides for SC4 for New Orleans, 1999-11-12; Paul, Greg
  6. WG12 N444 - WG12 Plenary Slides for New Orleans, 1999-11-10; Paul, Greg
  7. WG12 N443 - WG12 Opening Plenary Slides for SC4 for New Orleans, 1999-11-08; Paul, Greg
  8. WG12 N442 - ISO/CD 10303-50, STEP Part 50, Integrated generic resource: Mathematical constructs, 1999-11-02; Kraushar, Phil
  9. WG12 N441 - Parametrics Framework for the exchange of geometric product models, undated; Christensen, Noel
    This document supersedes WG12N028.
  10. WG12 N440 - ISO/WD 10303-108, STEP Part 108, Integrated application resource: Parameterization and constraints for explicit geometric product models, 1999-11-01; Pratt, Mike
    WG12 N-Docs 430 - 439 (0 entries 10 subfolders)
  1. WG12 N439 - EXPRESS for TC for ISO 10303-105:1996, STEP Part 105, Integrated application resource: Parameterization and constraints for explicit geometric product models, 1999-11-01; Paul, Greg
  2. WG12 N438 - Draft TC1 for ISO 10303-105:1996, STEP Part 105, Integrated application resource: Kinematics, 1999-10-19; Sugimura, Nobuhiro
  3. WG12 N437 - EXPRESS for Draft TC 1 for ISO 10303-47:1997, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1999-11-01; Slovensky, Len
  4. WG12 N436 - Draft TC 1 for ISO 10303-47:1997, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1999-11-01; Slovensky, Len
  5. WG12 N435 - EXPRESS for TC for ISO 10303-105:1996, STEP Part 105, Integrated application resource: Kinematics, 1999-10-05; Paul, Greg
  6. WG12 N434 - Draft TC1 for ISO 10303-105:1996, STEP Part 105, Integrated application resource: Kinematics, 1999-10-05; Sugimura, Nobuhiro
  7. WG12 N433 - EXPRESS for TC for ISO 10303-105:1996 STEP Part 105, Integrated application resource: Kinematics, 1999-10-13; Paul, Greg
  8. WG12 N432 - ISO/IS 10303-517 Document, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-13; Philipp, Martin
    This document is © ISO. This document supersedes document WG12 N425.
  9. WG12 N431 - Convener Approval Checklist for ISO/IS 10303-517, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-16; Paul, Greg
  10. WG12 N430 - ISO/IS 10303-517 Short Names List, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-16 Philipp, Martin
    WG12 N-Docs 420 - 429 (0 entries 10 subfolders)
This folder contains
  1. WG12 N429 - ISO/IS 10303-517 EXPRESS, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-16; Philipp, Martin
  2. WG12 N428 - Internal Review Checklist for ISO/IS 10303-517, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-02; Philipp, Martin
  3. WG12 N427 - Project Leader Approval Checklist for ISO/IS 10303-517, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-02; Philipp, Martin
  4. WG12 N426 - ISO/IS 10303-517 Issue Log, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-02; Philipp, Martin
  5. WG12 N425 - ISO/IS 10303-517 Document, STEP Part 517, Application interpreted construct: Mechanical design geometric presentation, 1999-09-10; Philipp, Martin
    This document is © ISO. This document supersedes document WG12 N201.
  6. WG12 N424 - Codes for Units of Measure Used in International Trade, 1995-08-01; Wandmacher, Dick
  7. WG12 N423 - White Paper to Support the Call for Experts on Business Objects Summit, 1999-08-19; Wandmacher, Dick
  8. WG12 N422 - Minutes from Orlando Parametrics Meeting, 1999-07-30; Pratt, Mike
  9. WG12 N421 - Convener Approval Checklist for ISO/IS 10303-515, STEP Part 515, Application interpreted construct, Constructive solid geometry, 1999-09-14; Paul, Greg
  10. WG12 N420 - Project Leader Approval for Checklist ISO/IS 10303-515, STEP Part 515, Application interpreted construct, Constructive solid geometry, 1999-09-10; Maier, Markus
    WG12 N-Docs 410 - 419 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N419 - Internal Review Checklist for ISO/IS 10303-515, STEP Part 515, Application interpreted construct: Constructive solid geometry, 1999-08-09; Maier, Markus
  2. WG12 N418 - AIC 515 Ballot Comment Responses, ISO/IS 10303-515, STEP Part 515, Application interpreted construct: Constructive solid geometry, 1999-09-10; Maier, Markus
  3. WG12 N417 - EXPRESS for ISO/IS 10303-515, STEP Part 515, Application interpreted construct: Constructive solid geometry, 1999-09-10; Maier, Markus
  4. WG12 N416 - ISO/IS 10303-515 document, STEP Part 515, Application interpreted construct: Constructive solid geometry, 1999-09-10; Maier, Markus
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N151.
  5. WG12 N415 - EXPRESS for TC2 for ISO 103030-42:1994, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-08-14; Goult, Ray
  6. WG12 N414 - TC2 for ISO 103030-42:1994, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-08-14; Goult, Ray
  7. WG12 N413 - ISO 10303-514 EXPRESS, STEP Part 514, Application interpreted construct (AIC): Advanced boundary representation, 1999-08-04; Goult, Ray
  8. WG12 N412 - EXPRESS for ISO/DIS 10303-518, STEP Part 518, Application interpreted construct (AIC): Mechanical design shaded representation, 1999-12-21; Haenisch, Jochen
  9. WG12 N411 - ISO/DIS 10303- 518 after PL Signoff, STEP Part 518, Application interpreted construct (AIC): Mechanical design shaded representation, 1999-12-29; Haenisch, Jochen
    This document is © ISO. This document supersedes ISO TC184/SC4/WG4 N668.
  10. WG12 N410 - ISO 10303 white paper - CAM-I AIS evaluation in view of neutral modeling interface for use in history based parametrics, 1999-07-20; Ohtaka, Akihiko
    WG12 N-Docs 400 - 409 (0 entries 10 subfolders)
  1. WG12 N409 - ISO 10303 white paper - Assembly constraints in explicit parametric model representation, 1999-07-20; Ohtaka, Akihiko
  2. WG12 N408 - ISO 10303 white paper - Fixed constraints in explicit parametric model representation, 1999-07-13; Ohtaka, Akihiko
  3. WG12 N407 - Final Minutes of WG12 Lillehammer Meeting, 1999-06-08; Endress, Michael
  4. WG12 N406 - ISO 10303-514, document after Convener Review. STEP Part 514, Application interpreted construct (AIC): Advanced boundary representation, 1999-07-29; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N396.
  5. WG12 N405 - Convener Approval Checklist for ISO/IS 10303-514, STEP Part 514, Application interpreted construct (AIC): Advanced boundary representation, 1999-08-03; Paul, Greg
  6. WG12 N404 - Project Leader Approval Checklist for ISO/IS 10303-514, STEP Part 514, Application interpreted construct (AIC): Advanced boundary representation, 1999-07-20; Goult, Ray
  7. WG12 N403 - ISO/IS 10303-512, document after Convener Review, STEP Part 512, Application interpreted construct (AIC): Faceted boundary representation, 1999-07-23; Goult, Ray
    This document is © ISO. This document supersedes ISO TC184/SC4/WG12 N394.
  8. WG12 N402 - Convener Approval Checklist for ISO/IS 10303-512, STEP Part 512, Application interpreted construct (AIC): Faceted boundary representation, 1999-07-23; Greg Paul
  9. WG12 N401 - Project Leader Approval Checklist for ISO/IS 10303-512, STEP Part 512, Application interpreted construct (AIC): Faceted boundary representation, 1999-07-20; Goult, Ray
  10. WG12 N400 - EXPRESS for ISO/IS 10303-511, STEP Part 511, Application interpreted construct: Topologically bounded surface, 1999-07-20; Goult, Ray
    WG12 N-Docs 390-399 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N399 - Project Leader Approval Checklist for ISO/IS 10303-511, STEP Part 511, Application interpreted construct: Topologically bounded surface, 1999-07-14; Goult, Ray
  2. WG12 N398 - Convener Approval Checklist for ISO/IS 10303-511, STEP Part 511, Application interpreted construct: Topologically bounded surface, 1999-07-19; Paul, Greg
  3. WG12 N397 - ISO/DIS 10303- 514 ballot comment resolutions, STEP Part 514, Application interpreted construct (AIC): Advanced boundary representation, and Project Leader Approval Checklist 1999-07-20; Goult, Ray
  4. WG12 N396 - ISO/DIS 10303- 514 document after Project Leader signoff, STEP Part 514, Application interpreted construct (AIC): Advanced boundary representation, 1999-07-14; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N158.
    WG12 N395 - ISO/DIS 10303-512, ballot comment resolutions, STEP Part 512, Application interpreted construct (AIC): Faceted boundary representation, 1999-07-20; Goult, Ray
  5. WG12 N394 - ISO/DIS 10303-512 document after PL signoff, STEP Part 512, Application interpreted construct (AIC): Faceted boundary representation, 1999-07-14; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N157.
  6. WG12 N393 - ISO/DIS 10303-511 ballot comment resolutions, STEP Part 511, Application interpreted construct (AIC): Topologically bounded surface, 1999-07-15; Goult, Ray
  7. WG12 N392 - ISO/IS 10303-511 document after PL signoff, STEP Part 511, Application interpreted construct (AIC): Topologically bounded surface, 1999-07-12; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N156.
  8. WG12 N391 - SC4/WG12 Part Review Procedure, 1999-07-12; Paul, Greg
  9. WG12 N390 - ISO/IS 10303-520 Document after Convener Review, STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, 1999-07-19; Philipp, Martin
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N382.
    WG12 N-Docs 380 - 389 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N389 - Convener Approval Checklist for ISO 10303-520 (AIC 520), STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, undated; Paul, Greg
  2. WG12 N388 - Convener Approval Checklist for ISO/FDIS 10303-519 (AIC 519), STEP Part 519, Application interpreted construct (AIC): Geometric tolerances, 1999-07-06; Paul, Greg
  3. WG12 N387 - Convener Approval Checklist for ISO/IS 10303-510 (AIC 510), STEP Part 510, Application interpreted construct (AIC): Geometrically bounded wireframe, 1999-07-07; Paul, Greg
  4. WG12 N386 - Convener Approval Checklist for ISO/IS 10303-503 (AIC 503), STEP Part 503, Application interpreted construct (AIC): Geometrically bounded 2D wireframe, 1999-07-07; Paul, Greg
  5. WG12 N385 - Convener Approval Checklist for ISO/IS 10303-502 (AIC 502), STEP Part 502, Application interpreted construct (AIC): Shell-based wireframe, 1999-07-07; Paul, Greg
  6. WG12 N384 - Convener Approval Checklist for ISO/IS 10303-501 (AIC 501), STEP Part 501, Application interpreted construct (AIC): Edge-based wireframe, 1999-07-07; Paul, Greg
  7. WG12 N383 - EXPRESS for AIC 520, STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, undated; Philipp, Martin
  8. WG12 N382 - ISO/IS 10303-520, AIC 520 Document after Convener Review, STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, 1999-06-30; Philipp, Martin
    This document is © ISO. This document supersedes ISO TC184/SC4 WG12 N349.
  9. WG12 N381 - Ballot Comments/Issue Log for ISO/DIS 10303-519, STEP Part 519, Application interpreted construct (AIC): Geometric tolerances, 1999-07-20; Philipp, Martin
  10. WG12 N380 - EXPRESS for ISO/FDIS 10303-519 (AIC 519), STEP Part 519, Application interpreted construct (AIC): Geometric tolerances undated; Philipp, Martin
    WG12 N-Docs 370 - 379 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N379 - ISO/FDIS 10303-519, (AIC 519 Document after Convener Review), STEP Part 519, Application interpreted construct (AIC): Geometric tolerances, 1999-06-30; Martin Philipp
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N348.
  2. WG12 N378 - EXPRESS for AIC 510, ISO/IS 10303-510, STEP Part 510, Application interpreted construct (AIC): Geometrically bounded wireframe, 1999-06-30; Slovensky, Len
  3. WG12 N377 - ISO/IS 10303-510, (AIC 510 Document after Convener Review), STEP Part 510, Application interpreted construct (AIC): Geometrically bounded wireframe, 1999-06-30; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N347.
  4. WG12 N376 - EXPRESS for ISO/IS 10303-503, (AIC 503), STEP Part 503, Application interpreted construct (AIC): Geometrically bounded 2D wireframe, 1999-06-30; Slovensky, Len
  5. WG12 N375 - ISO/IS 10303-503, (AIC 503 Document after Convener Review), STEP Part 503, Application interpreted construct (AIC): Geometrically bounded 2D wireframe, 1999-06-30; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG 12N346.
  6. WG12 N374 - EXPRESS for ISO/IS 10303-502, (AIC 502), STEP Part 502, Application interpreted construct (AIC): Shell-based wireframe, 1999-06-30; Slovensky, Len
  7. WG12 N373 - ISO/IS 10303-502, (AIC 502 Document after Convener Review,) STEP Part 502, Application interpreted construct (AIC): Shell-based wireframe, 1999-06-30; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N345.
  8. WG12 N372 - EXPRESS for ISO/IS 10303-501, (AIC 501), STEP Part 501, Application interpreted construct (AIC): Edge-based wireframe, 1999-06-30; Slovensky, Len
  9. WG12 N371 - ISO/IS 10303-501, (AIC 501 Document after Convener Review), STEP Part 501, Application interpreted construct (AIC): Edge-based wireframe, 1999-06-30; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG 12 N344.
  10. WG12 N370 - DRAFT SC4/WG12 Part Review Procedure, 1999-06-28; Paul, Greg
    WG12 N-Docs 360 - 369 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N369 - ISO TC184/SC4/WG12 Closing Plenary Report - Lillehammer, 1999-06-11; Paul, Greg
  2. WG12 N368 - Datum Model for ISO 10303-47 SEDS Issues, 1999-07-01; McCaleb, Mike
  3. WG12 N367 - Internal Review Checklist for ISO/IS 10303-510, (AIC 510), STEP Part 510, Application interpreted construct (AIC): Geometrically bounded wireframe, 1999-06-23; Slovensky, Len
  4. WG12 N366 - Project Leader Approval Checklist for ISO/IS 10303-510, (AIC 510), STEP Part 510, Application interpreted construct (AIC): Geometrically bounded wireframe, 1999-06-23; Slovensky, Len
  5. WG12 N365 - Ballot Comment Responses for ISO/IS 10303-510, (AIC 510), STEP Part 510, Application interpreted construct (AIC): Geometrically bounded wireframe, 1999-06-23; Slovensky, Len
  6. WG12 N364 - Internal Review Checklist for ISO/IS 10303-503, (AIC 503), STEP Part 503, Application interpreted construct: Geometrically bounded 2D wireframe, 1999-06-23; Slovensky, Len
  7. WG12 N363 - Project Leader Approval Checklist for ISO/IS 10303-503, (AIC 503), STEP Part 503, Application interpreted construct (AIC): Geometrically bounded 2D wireframe, 1999-06-23; Slovensky, Len
  8. WG12 N362 - Ballot Comment Responses for ISO/IS 10303-503, (AIC 503), STEP Part 503, Application interpreted construct (AIC): Geometrically bounded 2D wireframe, 1999-06-23; Slovensky, Len
  9. WG12 N361 - Internal Review Checklist for ISO/IS 10303-502, (AIC 502), STEP Part 502, Application interpreted construct (AIC): Shell-based wireframe, 1999-06-23; Slovensky, Len
  10. WG12 N360 - Project Leader Approval Checklist for ISO/IS 10303-502, (AIC 502 ), STEP Part 502, Application interpreted construct (AIC): Shell-based wireframe, 1999-06-23; Slovensky, Len
    WG12 N-Docs 350 - 359 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N359 - Ballot Comment Responses for ISO/IS 10303-502, (AIC 502), STEP Part 502, Application interpreted construct (AIC): Shell-based wireframe, 1999-06-23; Slovensky, Len
  2. WG12 N358 - Internal Review Checklist for ISO/IS 10303-501, (AIC 501), STEP Part 501, Application interpreted construct (AIC): Edge-based wireframe, 1999-06-23; Slovensky, Len
  3. WG12 N357 - Project Leader Approval Checklist for ISO/IS 10303-501, (AIC 501), STEP Part 501, Application interpreted construct (AIC): Edge-based wireframe, 1999-06-23; Slovensky, Len
  4. WG12 N356 - Ballot Comment Responses for ISO/IS 10303-501, (AIC 501), STEP Part 501, Application interpreted construct (AIC): Edge-based wireframe, 1999-06-23; Slovensky, Len
  5. WG12 N355 - DRAFT Minutes - ISO TC184/SC4/WG12 Lillehammer Meeting, 1999-06-09; Endress, Michael
  6. WG12 N354 - Internal Review Checklist for ISO/IS 10303-519, (AIC 519) STEP Part 519, Application interpreted construct (AIC): Geometric tolerances, 1999-06-28; Philipp, Martin
  7. WG12 N353 - Project Leader Approval Checklist for ISO/IS 10303-519, (AIC 519 ), STEP Part 519, Application interpreted construct (AIC): Geometric tolerances, 1999-06-28; Philipp, Martin
  8. WG12 N352 - Internal Review Checklist for ISO/IS 10303-520, (AIC 520), STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, 1999-06-23; Philipp, Martin
  9. WG12 N351 - Project Leader Approval Checklist for ISO/IS 10303-520, (AIC 520), STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, 1999-06-23; Philipp, Martin
  10. WG12 N350 - Ballot Comment Responses for ISO/IS 10303-520, (AIC 520), STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, 1999-06-23; Philipp, Martin
    WG12 N-Docs 340 - 349 (0 entries 11 subfolders)
This folder contains:
  1. WG12 N349 - ISO/IS 10303-520 Document from Project Leader, STEP Part 520, Application interpreted construct (AIC): Associative draughting elements, 1999-06-22; Philipp, Martin
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N181.
  2. WG12 N348 - ISO/FDIS 10303-519, Document from Project Leader, STEP Part 519, Application interpreted construct (AIC): Geometric tolerances, 1999-06-22; Philipp, Martin
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N180.
  3. WG12 N347 - IS/IS 10303-510 documents from Project Leader, STEP Part 510, Application interpreted construct: Geometrically bounded wire frame, 1999-06-17; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N150.
  4. WG12 N346 - ISO/IS 10303-503 documents from Project Leader, STEP Part 503, Application interpreted construct, Geometrically bounded 2D wire frame, 1999-06-17; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N112.
  5. WG12 N345 - ISO/IS 10303-502 documents from Project Leader, STEP Part 502, Application interpreted construct (AIC): Shell-based wire frame, 1999-06-17; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N148.
  6. WG12 N344 - ISO/IS 10303-501 documents from Project Leader, STEP Part 501, Application interpreted construct (AIC): Edge-based wire frame, 1999-06-17; Slovensky, Len
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N147.
  7. WG12 N343 - WG12 Preliminary Agenda for New Orleans Meeting, 1999-07-16; Paul, Greg
  8. WG12 N342 - ISO 10303-50, STEP Part 50, Integrated generic resource: Mathematical representation (slides), 1999-06-01; Kraushar, Phil
  9. WG12 N341 - ISO 10303-42/TC2, after Lillehammer, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-06-22; Goult, Ray
  10. WG12 N340 - ISO/DIS 10303-42 ed2, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-06-18; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N325.
    WG12 N-Docs 330 - 339 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N339 - Key Issues of History Based Parametrics and ideas to relieve them, 1999-05-31; Ohtaka, Akihiko
  2. WG12 N338 - JNC Proposal for STEP Assembly Model of Products, 1999-06-05; Sugimura, Nobuhiro
  3. WG12 N337 - TC213 Slides from AIC 519 DIS Ballot Comment Workshop - 99/6/11, 1999-06-11; Vincent, Renald
  4. WG12 N336 - AIC 519 DIS Ballot Resolutions for ISO/DIS 10303-519, STEP Part 519, Application interpreted construct: Geometric tolerances, 1999-06-23; Philipp, Martin
  5. WG12 N335 - STEP Part 519, Application interpreted construct: Geometric tolerances, DIS Ballot Comment Workshop Minutes - 99/6/11-12, 1999-06-11/12 Philipp, Martin
  6. WG12 N334 - Resource for Engineering Data in ISO 10303-50, STEP Part 50, Integrated generic resource: Mathematical Representation (slides), 1999-07-01; Kraushar, Phil
  7. WG12 N333 - WG12 Plenary Slides for Lillehammer, 1999-07-01; Paul, Greg
  8. WG12 N332 - Final Agenda for ISO TC184/SC4/WG12 Lillehammer Meeting, 1999-06-09; Paul, Greg
  9. WG12 N331 - Lillehammer SC4 Opening Plenary WG12 Report, 1999-06-07; Paul, Greg
  10. WG12 N330 - EXPRESS for ISO/DIS 10303-42 ed2 Ballot, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-05-27; Goult, Ray
    WG12 N-Docs 320 - 329 (0 entries 9 subfolders)
This folder contains:
  1. WG12 N329 - Draft copy of ISO/CD 10303-50, STEP Part 50, Integrated generic resource: Mathematical representation, 1999-05-24; Kraushar, Phil
    This document supersedes WG12N174 (Clause 7 only).
  2. WG12 N328 - QC Internal Review for ISO 10303-42e2 for DIS Ballot, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-05-24; Anderson, Bill
  3. WG12 N327 - Project Leader Checklist for ISO 10303-42e2 for DIS ballot, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-05-14; Goult, Ray
  4. WG12 N326 - CD Ballot Comment Resolution for ISO 10303-42e2, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-05-24; Goult, Ray
  5. WG12 N325 - STEP Part 42 after Convener Review, ISO 10303-42e2, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-05-27; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N322.
  6. WG12 N324 - EXPRESS Unique Requirements for ISO TC184/SC4 Common Resources, 1999-05-18; Paul, Greg
  7. WG12 N323 - 2nd TC for ISO 10303-42, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-05-17; Goult, Ray
  8. WG12 N322 - DIS for Project Leader Approval, undated; Goult, Ray
  9. WG12 N321 - ISO/WD 10303-108, STEP Part 108, Integrated application resource: Parametrization and constraints for explicit geometric product models, 1999-05-14; Pratt, Mike
    This document supersedes ISO TC 184/SC4/WG12 N028.
  10. WG12 N320 - 2nd TC for ISO/DIS 10303-42, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-04-28; Goult, Ray
    WG12 N-Docs 310 - 319 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N319 - EXPRESS for Draft TC 1 for ISO 10303-47:1997, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1999-04-13; Slovensky, Len
  2. WG12 N318 - Draft TC 1 for ISO 10303-47:1997, STEP part 47, Integrated generic resource: Shape variation tolerances, 1999-04-12; Slovensky, Len
  3. WG12 N317 - Draft Agenda for ISO TC184/SC4/WG12 Lillehammer Meeting, 1999-04-29; Paul, Greg
  4. WG12 N316 - Part 42 for SC4 DIS Review ISO/DIS 10303-42, STEP Part 42, Integrated generic resource: Geometric and topological representation, undated; Goult, Ray
  5. WG12 N315 - Part 42 DIS for WG12 Review - with redlines: ISO/DIS 10303-42, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-03-18; Goult, Ray
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N174.
  6. WG12 N314 - TC for Part 46, ISO 10303-46, STEP Part 46, Integrated generic resource: Visual presentation, 1999-03-09; Ungerer, Max
  7. WG12 N313 - TC for Part 46 - EXPRESS, ISO 10303-46, STEP Part 46, Integrated generic resource: Visual presentation, 1999-03-09; Ungerer, Max
  8. WG12 N312 - TC for Part 46, ISO 10303-46, STEP Part 46, Integrated generic resource: Visual presentation, 1999-03-03; Ungerer, Max
  9. WG12 N311 - EXPRESS for Draft TC 1 for ISO 10303-47:1997, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1999-03-08; Ungerer, Max
  10. WG12 N310 - Draft TC 1 for ISO 10303-47:1997, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1999-03-08; Ungerer, Max
    WG12 N-Docs 300 - 309 (0 entries 9 subfolders)
This folder contains:
  1. WG12 N309 - ISO/DIS 10303-42 ed2 additions, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1999-03-01; Goult, Ray
  2. WG12 N308 - AP 210 Project Requested Addition to Part 46 TC, STEP Part 46, Integrated generic resource: Visual presentation, 1999-02-24; Thurman, Tom
  3. WG12 N307 - Draft TC1 for ISO 10303-105:1996, STEP Part 105, Integrated application resource: Kinematics, 1999-09-14; Sugimura, Nobuhiro
  4. WG12 N306 - DRAFT WG12 Minutes, ISO TC184/SC4/WG12 San Francisco Meeting, 1999-01-26; Paul, Greg
  5. WG12 N305 - Part 41 2nd Edition for DIS Ballot, ISO/DIS 10303-41, ed2, STEP Part 41, Integrated generic resource: Fundamentals of product description and support, 1999-02-19; Ziolko, Glen
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12N265.
  6. WG12 N304 - EXPRESS for Part 41 Technical Corrigendum 1, ISO/IS 10303-41, TC1, STEP Part 41, Integrated generic resource: Fundamentals of product description and support, 1999-02-10; Ziolko, Glen
  7. WG12 N303 - Part 41 Technical Corrigendum 1 - After WG12 Review, ISO/IS 10303-41, TC1, STEP Part 41, Integrated generic resource: Fundamentals of product description and support, 1999-02-10; Ziolko, Glen
  8. WG12 N302 - PLIB EXPRESSIONS Modeling Presentation from San Francisco Meeting, 1999-02-16; Pierra, Guy
  9. WG12 N301 - Additional IR and AIC errors presentation at San Francisco Meeting, 1999-01-19; Philipp, Martin
  10. WG12 N300 - STEP Part 41 for DIS - after QC, undated; Ziolko, Glen
    WG12 N-Docs 290 - 299 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N299 - TC184/SC4/WG12 Plenary Slides, San Francisco Meeting, January, 1999, 1999-01-23; Paul, Greg
  2. WG12 N298 - DRAFT Minutes - ISO TC184/SC4/WG12 San Francisco Meeting, January, 1999, 1999-01-26; Paul, Greg
  3. WG12 N297 - WG12 Report to TC184/SC4 Closing Plenary (slides), San Francisco, January, 1999, 1999-01-29; Paul, Greg
  4. WG12 N296 - WG12 Part 42, ISO 10303-42, STEP Part 42, Integrated generic resource: Geometrical and topological representation) Ballot Comment Resolution Workshop Minutes 1999-01-22/23, 1999-01-23; Goult, Ray
  5. WG12 N295 - ISO 10303 White Paper - Parametrics: A sample data model for History-based Parametrics and Key Issues, 1999-01-20; Pratt, Mike
  6. WG12 N294 - ISO/DIS 10303- 43, ed2, STEP Part 43, Integrated generic resource: Representation structures, after QC corrections incorporated, 1999-01-23; Fowler, Julian
    This document is © ISO. This document supersedes WG12N288.
  7. WG12 N293 - WG12 Report (slides) to TC184/SC4 Opening Plenary, San Francisco, January, 1999, 1999-01-25; Greg Paul
  8. WG12 N292 - ISO TR Type 3 - General Case Parametric Representation and Exchange - Future Directions, 1999-01-25; Wittenoom, Dick
  9. WG12 N291 - EXPRESS for ISO 10303-43:1994 TC 1, STEP Part 43, Integrated generic resource: Representation structures, 1999-01-07; Paul, Greg
  10. WG12 N290 - ISO 10303-43 TC 1 Draft, STEP Part 43, Integrated generic resource: Representation structures for WG12 Review, 1999-01-07; Paul, Greg
    WG12 N-Docs 280 - 289 (0 entries 9 subfolders)
This folder contains:
  1. WG12 N289 - ISO 10303-42 TC 1, STEP Part 42, Integrated generic resource: Representation structures for WG12 Review 1999-01-08; Goult, Ray
  2. WG12 N288 - ISO/ DIS 10303-43, STEP Part 43, Integrated generic resource: Representation structures for QC Review 1999-01-20; Fowler, Julian
    This document is © ISO. This document supersedes WG12N263.
  3. WG12 N287 - Draft WG12 Agenda for San Francisco Meeting, January, 1999 1998-12-17; Paul, Greg
  4. WG12 N286 - ISO/DIS 10303-508, STEP Part 508, Application interpreted construct (AIC): Non-manifold surface, after QC Review; 1999-01-29; Haenisch, Jochen
    This document is © ISO. This document supersedes WG12N273.
  5. WG12 N285 - ISO/DIS 10303-507, STEP Part 507, Application interpreted construct (AIC): geometrically bounded surface, after QC Review, 1999-02-10; Haenisch, Jochen
    This document is © ISO. This document supersedes WG12N272.
  6. WG12 N284 - Final WG12 Common Resources Plenary Meeting Minutes from Beijing, China (1998-10-07) 1998-12-18; Endres, Michael
  7. WG12 N283 - Changes from IS:1994 to DIS:1998 for ISO 10303-44, STEP Part 44, Integrated generic resource: Product structure configuration 1999-01-15; Gilbert, Mitch
    This document supersedes WG12N188. This document provides modifications to ISO/CD 10303-44:1994 for second edition.
  8. WG12 N282 - Ballot Comments/Issue Log for ISO/ DIS 10303-44, STEP Part 44, Integrated generic resource: Product structure configuration undated; Gilbert, Mitch
  9. WG12 N281- EXPRESS for ISO 10303-42 Technical Corrigendum 1, STEP Part 42, Integrated generic resource: Geometrical and topological representation 1998-12-12; Goult, Ray
  10. WG12 N280 - ISO/CD 10303-41, STEP Part 41, Integrated generic resource, Fundamentals of product description and support, Part 41 CD Deferred Comments Due to Upward Compatibility Issues 1998-12-07; Ziolko, Glen
    This is a subset of the official Part 41 2nd CD issue log documented within WG12 N266. All issue numbers identified within this document correlate with those documented within WG12N266.

    Some of these documents are only available in hardcopy. Please see the WG convener if you need a copy.
    WG12 N-Docs 270 - 279 (0 entries 9 subfolders)
This folder contains:
  1. WG12 N279 - ISO/DIS 10303-44, ed2, after QC Review, STEP Part 44, Integrated generic resource: Product structure configuration, undated; Gilbert, Mitch
  2. WG12 N278 - ISO/DIS 10303-44, ed2, for QC Review, STEP Part 44, Integrated generic resource: Product structure configuration, 1998-12-04; Gilbert, Mitch
    This document is © ISO. This document supersedes WG12N277.
  3. WG12 N277 - Proposed editorial requirements for the second edition of ISO 10303-41, -43, and -44, 1998-11-02; Fowler, Julian
  4. WG12 N276 - EXPRESS for Part 46, TC1, STEP Part 46, Integrated generic resource: Visual presentation, 1998-11-20; Ungerer, Max
  5. WG12 N275 - ISO 10303-46, TC1, STEP Part 46, Integrated generic resource: Visual presentation, 1998-11-20; Ungerer, Max
  6. WG12 N274 - ISO 10303-42, TC1 STEP Part 46, Integrated generic resource: Geometric and topoligcal representation, 1998-11-10; Goult, Ray
  7. WG12 N273 - ISO/DIS 10303-508 after Convener Review, STEP Part 508, Application interpreted construct: Non-manifold surface, 1998-11-08; Haenisch, Jochen
    This document is © ISO. This document supersedes WG12N261.
  8. WG12 N272 - ISO/DIS 10303-507 After Convener Review,STEP Part 507, Application interpreted construct: Geometrically bounded surface, 1998-11-05; Haenisch, Jochen
    This document is © ISO. This document supersedes WG12N260.
  9. WG12 N271 - Draft WG12 Meeting Minutes, Beijing, China, 1998-10-05; Endres, Michael
  10. WG12 N270 - ISO 10303-47:1997, Technical Corrigendum 1, EXPRESS for WG12 Review, STEP Part 47, Integrated generic resource: Tolerances 1998-10-20; Slovensky, Len
Some of these documents are only available in hardcopy. Please see the WG convener if you need a copy.
    WG12 N-Docs 260 - 269 (0 entries 8 subfolders)
This folder contains:
  1. WG12 N269 - ISO 10303-47, Technical Corrigendum 1 for WG12 Review, STEP Part 47, Integrated generic resource: Shape variation tolerances, 1998-10-20; Slovensky, Len
  2. WG12 N268 - ISO 10303-101:1994 Technical Corrigendum 1 EXPRESS - FINAL DRAFT, STEP Part 101, Integrated application resource: Draughting, 1998-10-26; Paul, Greg
  3. WG12 N267 - ISO/ DIS 10303-43 EXPRESS Draft , STEP Part 43, Integrated generic resource: Representation structures, undated; Fowler, Julian
  4. WG12 N266 - ISO/DIS 10303-41, ed2, Ballot Comment Resolutions, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 1998-11-04, Ziolko, Glen
  5. WG12 N265 - ISO/DIS 10303-41 ed2, after Convener Review, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 1998-11-16; Ziolko, Glen
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N259.
  6. WG12 N264 - ISO/DIS 10303-43, ed2 Ballot Comment Resolutions, STEP Part 43, Integrated generic resource: Representation structures, 1998-11-06; Fowler, Julian
  7. WG12 N263 - ISO/ DIS 10303-43 ed2, after Convener Review, STEP Part 43, Integrated generic resource: Representation structures, 1998-11-06; Fowler, Julian
    This document is © ISO. This document supersedes ISO TC184/SC4/WG12 N220.
  8. WG12 N262 - ISO 10303-509 DIS Draft, STEP Part 509, Integrated application resource: Manifold surface, undated: Haenisch, Jochen
    This document is © ISO.
  9. WG12 N261 - ISO 10303-508 DIS Draft, STEP Part 508, Integrated application resource: Non-Manifold surface, 1998-10-30; Haenisch, Jochen
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12 N144.
  10. WG12 N260 - ISO 10303-507 DIS Draft, STEP Part 507, Integrated application resource: Geometrically bounded surface, 1998-10-29; Haenisch, Jochen
    This document is © ISO. This document supersedes ISO TC 184/SC4/ WG12 N143.
Some of these documents are only available in hardcopy. Please see the WG convener if you need a copy.
    WG12 N-Docs 250 - 259 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N259 - ISO 10303-41, Part 41 ed2, DIS Preparation Version, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 1998-10-23; Ziolko, Glen
  2. WG12 N258 - Procedures for Technical Corrigendum in ISO TC184/SC4 - DRAFT, 1998-10-19; Paul, Greg
  3. WG12 N257 - ISO 10303-45, Part 45 Technical Corrigendum 1 EXPRESS - Final for SC4, STEP Part 45, Integrated generic resource: Materials, 1998-10-16; Moreno, Anna
  4. WG12 N256 - ISO 10303-45, Part 45 Technical Corrigendum 1 - Final, STEP Part 45, Integrated generic resource: Materials, 1998-10-16; Moreno, Anna
  5. WG12 N255 - ISO 10303-506, AIC 506 for DIS, STEP Part 506, Integrated application resource: Draughting elements, 1998-12-11; Polikaitis, Linas
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N208.
  6. WG12 N254 - ISO 10303-505, AIC 505 for DIS, STEP Part 505, Integrated application resource: Drawing structure and administration, 1998-12-15; Polikaitis, Linas
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N207.
  7. WG12 N253 - ISO 10303-504, AIC 504 for DIS, STEP Part 504, Integrated generic resource: Draughting annotation, 1998-12-15, Polikaitis, Linas
    This document is © ISO. This document supersedes ISO TC 184/SC4/WG12 N206.
  8. WG12 N252 - Y2K Guidance for SC4 - SC4 Presentation at Beijing (slides) 1998-09-25; Paul, Greg; Fowler, Julian
  9. WG12 N251 - WG12 Report to SC4 Closing Plenary - Beijing Meeting, 1998-10-09; Paul, Greg
  10. WG12 N250 - Summary of JNC Comments on ISO 10303-42, ed2, STEP Part 42, Integrated generic resource: Geometric and topoligical representation, 1998-10-06; Kobayashi, Kazuya, G
Some of these documents are only available in hardcopy. Please see the WG convener if you need a copy.
    WG12 N-Docs 240 - 249 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N249 - WG12 Long & Short Term Issues - Beijing Meeting, 1998-10-16; Paul, Greg
  2. WG12 N248 - Management Issues on WG12 Shape Representation, 1998-10-16; Kobayashi, Kazuya G.
  3. WG12 N247 - ISO 10303-44, Technical Corrigendum 1 - FINAL after QC Review, STEP Part 44, Integrated generic resource: Product structure configuration, 1998-10-03; Gilbert, Mitch
  4. WG12 N246 - ISO 10303-101, Technical Corrigendum 1 - Final w// Copyright, STEP Part 101, Integrated application resource: Draughting, 1998-10-20; Paul, Greg
  5. WG12 N245 - Y2K Guidance for SC4 - Presentation at Beijing, 1998-09-25;Paul, Greg, and Fowler, Julian
  6. WG12 N244 - ISO/DIS 10303-43, ed2, Project Leader Signoff and Internal Quality review checklist, STEP Part 43, Integrated generic resource: Representation structures, 1998-09-29; Fowler, Julian
  7. WG12 N243 - ISO 10303-43, Revised Issue Log for Beijing/DIS Ballot, STEP Part 43, Integrated generic resource: Representation structures, 1998-09-29; Fowler, Julian
  8. WG12 N242 - WG12 Report to SC4 Opening Plenary for Beijing Meeting (slides), 1998-10-05; Paul, Greg
  9. WG12 N241 - ISO 10303-44, Technical Corrigendum 1 - QC Review, STEP Part 44, Integrated generic resource: Product structure configuration, 1998-09-21; Gilbert, Mitch
    This document supersedes ISO TC184/SC4/WG12 N226.
  10. WG12 N240 - ISO 10303-46, Technical Corrigendum 1 EXPRESS - DRAFT for WG12 Review, STEP Part 46, Integrated generic resource: Visual presentation, 1998-09-18; Ungerer, Max
    WG12 N-Docs 230 - 239 (0 entries 9 subfolders)
This folder contains:
  1. WG12 N239 - ISO 10303-46, Technical Corrigendum 1 - DRAFT for WG12 Review, STEP Part 46, Integrated generic resource: Visual presentation, 1998-09-18; Ungerer, Max
  2. WG12 N238 - ISO 10303-101, Technical Corrigendum 1 EXPRESS - 3rd DRAFT for WG12 Review, STEP Part 101, Integrated application resource: Draughting, 1998-09-21; Paul, Greg
  3. WG12 N237 - ISO 10303-101, Technical Corrigendum 1 - 3rd DRAFT for WG12 Review, STEP Part 101, Integrated application resource: Draughting, 1998-09-21; Paul, Greg
  4. WG12 N236 - WG12 Input to Firm Foundation for the Next Release of SC4 Standards, 1998-09-14; Paul, Greg
  5. WG12 N235 - DRAFT - TC 184/SC4/WG12 Agenda for Beijing, 1998-09-10; Paul, Greg
  6. WG12 N234 - Minutes of WG12 Meeting in Bad Aibling, Germany, 1998-09-08; Endres, Michael
  7. WG12 N233 - WG12 Long & Short Term Issues - Draft for Beijing Meeting, 1998-09-03; Paul, Greg
  8. WG12 N232 - ISO 10303-101, Technical Corrigendum 1 EXPRESS - 2nd DRAFT for WG12 Review, STEP Part 101, Integrated application resource: Draughting, 1998-08-27; Paul, Greg
  9. WG12 N231 - ISO 10330-101, Technical Corrigendum 1 - 2nd DRAFT for WG12 Review, STEP Part 101, Integrated application resource: Draughting, 1998-08-27; Paul, Greg
    This document supersedes ISO TC184/SC4/WG12 N203.
  10. WG12 N230 - ISO 10303-41, DIS Preparation Version - Beijing Distribution,STEP Part 41, Integrated generic resource: Fundamentals of product description and support, undated: Ziolko, Glen
Some of these documents are only available in hardcopy. Please contact the WG convener if you need a copy.
    WG12 N-Docs 220 - 229 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N229 - ISO/CD 10303-44 Issues Log, STEP Part 44, Integrated generic resource: Product structure configuration, 1998--08-27; Gilbert, Mitch
    This document supersedes ISO TC184/SC4 WG12N191.
  2. WG12 N228 - ISO/CD 10303-44 Technical Corrigendum 1 - FINAL EXPRESS, STEP Part 44, Integrated generic resource: Product structure configuration, 1998-09-04; Gilbert, Mitch
  3. WG12 N227 - ISO/DIS 10303-44 ed2 for Convener Signoff, STEP Part 44, Integrated generic resource: Product structure configuration, 1998-09-04; Gilbert, Mitch
    This document is © ISO. This document supersedes ISO TC 184/SC4 WG12N187.
  4. WG12 N226 - ISO 10303-44, Technical Corrigendum 1 - FINAL, STEP Part 44, Integrated generic resource: Product structure configuration, 1998-08-20; Gilbert, Mitch
  5. WG12 N225 - ISO 10303-41, Technical Corrigendum 1 EXPRESS - FINAL, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 1998-12-22; Ziolko, Glen
  6. WG12 N224 - ISO 10303-41, Technical Corrigendum 1 - FINAL for WG12 Review, STEP Part 41, Integrated generic resource: Fundamentals of product structure and support, 1998-12-22; Ziolko, Glen
  7. WG12 N223 - ISO 10303-42, Technical Corrigendum 1 EXPRESS - DRAFT for WG12 Review, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1998-08-18; Goult, Ray
  8. WG12 N222 - ISO 10303-42, Technical Corrigendum 1 - DRAFT for WG12 Review, STEP Part 42, Integrated generic resource: Geometric and topological representation, 1998-08-18; Goult, Ray
  9. WG12 N221 - Schema referencing all TC input for ISO 10303-41 thru 45, STEP Parts 41-45, 1998-08-05; Paul, Greg
  10. WG12 N220 - ISO 10303-43, second edition, post-Long Beach workshop version, STEP Part 43, Integrated generic resource: Representation structures, 1998-09-29; Fowler, Julian
    This document is © ISO. This document supersedes ISO TC184/SC4 WG12N198.
    WG12 N-Docs 210 - 219 (0 entries 10 subfolders)
This folder contains:
  1. WG12 N219 - ISO 10303-45, Technical Corrigendum 1 EXPRESS - DRAFT for WG12 Review, STEP Part 45, Integrated generic resource: Materials, 1998-07-24; Moreno, Anna